Code :

Code: 56
Description: Standard USB Port Disabled 56 USB Port x Disabled
Remedy: These messages may appear when data is sent to the printer across the USB port, but the port is disabled. Note: Once the error is displayed the first time, reporting of further errors is suppressed until the printer is reset or menus are entered. The following actions can be taken: • Press Go to clear the message. Any data received on the USB port is discarded • Press Menu to access the Busy/Waiting Menu. The following functions may be available: • Reset Printer • Reset Active Bin • Check Supply Levels Note: Menu Lockout does NOT prevent access to the Busy/ Waiting Menu.

Code: 57
Description: Configuration Change Held Jobs May Not Be Restored Help Jobs May Not be Restored
Remedy: This message are displays when the printer has attempted to Print and Hold jobs from the disk and found that some or all of the jobs could not be restored. Each of the three 57 Configuration Held Jobs messages describe different conditions under which the restore failed. • Primary Message: 37 Insufficient Memory. The printer firmware ran out of memory while attempting to restore the jobs. Secondary Message: Held Jobs May Not Be Restored. • Primary Message: 57 Configuration Change - The printer firmware could not restore jobs from the disk because the configuration of the printer has changed. Secondary Message: Held Jobs May Not Be Restored. Some configuration changes that can cause a 57 Configuration Change message are: - Code version change - Paper handling option removed - Disk drive has been moved to a different printer. • Primary Message: Held Jobs May Not Be Restored handles any other conditions where any of the Print and Hold jobs could not be restored from the disk. Note: Some of the Print and Hold jobs may not be restored. They remain on the disk but cannot be accessed.

Code: 58
Description: Too Many Trays Attached
Remedy: This message is displayed when too many trays are attached to the printer. Check the specifications and verify the number of trays allowed on each printer model.

Code: 58
Description: Too Many Bins Attached
Remedy: This message is displayed when too many optional bins are attached to the printer or if an unsupported combination of bins is installed.

Code: 58
Description: Too Many Disks Installed
Remedy: This message is displayed when too many disks are installed. Note: Some configurations of different output options require the installation of one option before the other.

Code: 58
Description: Too Many Flash Options
Remedy: This message is displayed when too many Flash Options are installed. Verify the maximum number of flash memory options which may be installed. Note: Press Go to clear the message. The extra flash memory options are ignored.

Code: 59
Description: 59 Incompatible Output Bin x 59 Incompatible Tray x 59 Incompatible Duplex
Remedy: These messages are displayed when the user installs an incompatible option. The following options may be incompatible for use on one or more C76x models: • Output Bin x (x=1, 2 or 3) • Tray x (x=2,3,4 or 5) • Duplex • Envelope feeder The user is required to remove the incompatible option and press Go to clear the message. Note: If the user installed the incompatible option to satisfy a Check Option Connections/Reattach Option attendance condition, the user must reinstall an associated compatible option or Hot Unplug the option.

Code: 61
Description: Defective Disk
Remedy: This message is displayed when the printer detects a defective disk. This error may occur at power on, or during disk format and write operations. Press Go to clear the message. The disk is marked as defective and normal printer operation continues. Disk operations are not allowed with a defective disk and the Format Disk menu item is not shown.