Remedy: 1 Is connector CN27 connected properly? Go to step 2. Plug the connector in securely. 2 Clean the black drum sensor LED. Did this fix the problem? Problem solved. Replace the black drum sensor. Go to step 3. 3 Did replacing the black drum sensor fix the problem? Problem solved. Replace the printer controller board.
Remedy: 1 Are connectors CN35 and CN36 on the printer controller board connected properly? Replace the printer controller board. Plug the connector in securely.
Remedy: 1 Is connector CN40 on the printer controller board connected properly? Go to “Highcapacity feeder (HCF) service check”. Plug the connector in securely.
Remedy: 1 Is connector CN40 on the printer controller board connected properly? Go to “Highcapacity feeder (HCF) service check”. Plug the connector in securely.
Description: Printer/Printhead Controller Board Communication Error
Remedy: 1 Make sure all printhead LED EPROMS are present on the printhead controller board. Are all the EPROMS present? Go to step 2 Replace the EPROMS. 2 Replace the printhead controller board. Did this fix the problem? Problem solved. Replace the printer controller board.
Remedy: 1 Are the finisher to printer interface cable and power cable properly connected? Go to step 2. Properly connect the cable. 2 Replace the interface cable. Did this resolve the problem? Problem solved. Replace the control finisher board. Go to step 3. 3 Did finisher control board replacement resolve the problem? Problem solved. Replace the printer control board.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.