Description: 980.xx Engine experiencing unreliable communication with the specified device. Note: <device> can be one of the following: • Tray 2 • Tray 3 • Tray 4 981.xx Engine protocol violation detected by the specified device. Note: <device> can be one of the following: • Tray 2 • Tray 3 • Tray 4 982.xx Communications error detected by the specified device. Note: <device> can be one of the following: • Tray 2 • Tray 3 • Tray 4 983.xx Invalid command received by the specified device. Note: <device> can be one of the following: • Tray 2 • Tray 3 • Tray 4 984.xx Invalid command parameter received by the specified device. Note: <device> can be one of the following: • Tray 2 • Tray 3 • Tray 4
Remedy: Step 1 a Check if the firmware is updated, and then update the firmware if necessary. b Make sure that the printer supports the option. See the Printer, Option, and Stand Compatibility Guide. c Make sure that the option is properly attached to the printer or adjacent option. d Reset the printer. Does the problem remain? Go to step 2. The problem is solved. Step 2 Reseat the printer interface cable on the printer controller board. Does the problem remain? Go to step 3. The problem is solved. Step 3 Do the following to each option: a Reinstall the option. b Print a test page, and then check if the option is defective. Are all options properly working? Go to step 4. Contact the next level of support Step 4 Reseat the option interface cable. Does the problem remain? Go to step 5. The problem is solved. Step 5 Check the option interface cable for damage. Is the cable free of damage? Go to step 6. Go to step 7. Step 6 Replace the option interface cable. See “550-sheet tray interface cable removal”. Does the problem remain? Go to step 7. The problem is solved. Step 7 Replace the option controller board. See “550-sheet tray controller board assembly removal”. Does the problem remain? Contact the next level of support The problem is solved.
Description: 990.xx An equipment check condition oc991.xx An equipment check condition occurred in the controller card. 992.xx General software error.curred but unable to determine the exact component failure.
Remedy: Step 1 a Check if the firmware is updated, and then update the firmware if necessary. b Make sure that the printer supports the option. See the Printer, Option, and Stand Compatibility Guide. c Make sure that the option is properly attached to the printer or adjacent option. d Reset the printer. Does the problem remain? Go to step 2. The problem is solved. Step 2 Reseat the printer interface cable on the printer controller board. Does the problem remain? Go to step 3. The problem is solved. Step 3 Do the following to each option: a Reinstall the option. b Print a test page, and then check if the option is defective. Are all options properly working? Go to step 4. Contact the next level of support Step 4 Reseat the option interface cable. Does the problem remain? Go to step 5. The problem is solved. Step 5 Check the option interface cable for damage. Is the cable free of damage? Go to step 6. Go to step 7. Step 6 Replace the option interface cable. See “550-sheet tray interface cable removal”. Does the problem remain? Go to step 7. The problem is solved. Step 7 Replace the option controller board. See “550-sheet tray controller board assembly removal”. Does the problem remain? Contact the next level of support The problem is solved.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.