Description: Tray 4 sensor never broke. Possible causes: • Incorrect tray 4 media setting • Incorrect tray 4 paper loading • Incorrect media restraint setting • Paper tray failure • Aligner failure • Transport belt module failure • Loading card stock from the special media tray above the fill line. • High humidity (replace paper)
Remedy: 1. Ensure the proper media is set for the type of paper used in tray 4. • Fan media, and then stack flat in tray 4. • Properly set the media restraints in tray 4. If the problem persists, go to “244.03, 244.11— Paper Jam service check”.
Description: Tray 4 detected a jam from idle. Possible causes: • Paper jam leaving page over the sensor • defective input sensor • Faulty system board
Remedy: • Clear away anything in the paper path that might cause the paper to jam. • If clearing a paper jam does not fix the problem, go to “243.17—Paper Jam service check”.
Description: While feeding from a lower tray, tray 4 pass thru sensor is not made. Possible causes: • Incorrect paper loading for the lower tray • Incorrect media restraint setting for the lower tray • Paper tray 4 assembly failure • Paper tray 5 assembly failure
Remedy: 1. Clear away anything in the paper path that might cause the paper to jam. 2.Make sure the proper media is set for the type of paper used in the lower tray. 3. Fan the media, and stack flat in the lower tray. 4. Properly set the media restraints in the lower tray. 5. Check the pick arm rolls in the lower feeding tray and replace if worn. If the problem persists, go to “244.26—Paper Jam service check”.
Description: While feeding from a lower tray, tray 4 pass thru sensor did not break. Possible cause is paper tray 4 assembly failure.
Remedy: • Clear away anything in the paper path that might cause the paper to jam. • Reseat option tray 4. • If the problem persists, go to “244.27—Paper Jam service check”.
Description: Pick timeout from tray 5 exceeded without a tray sensor break. Possible causes: • Tray 5 incorrect media setting • Tray 5 incorrect paper loaded • Tray 5 incorrect media restraintsetting • Tray 5 assembly failure • Aligner failure • Transport module failure
Remedy: 1. Remove all media present in the paper path. 2.Make sure proper media is set for the type of paper used in tray 5. 3. Fan the media, and stack flat in tray 5. 4. Properly set the media restraints in tray 5. If the problem persists, go to “245.03, 245.11— Paper Jam service check”.
Description: Possible causes: • Incorrect media setting • Incorrect paper loading • Incorrect media restraint setting • Tray 5 paper pick mechanism • Loading card stock from the special media tray above the fill line.
Remedy: 1. Ensure proper media is set for the type of paper used in tray 5. 2. Fan media, and stack flat in tray 5. 3. Properly set the media restraints in tray 5. 4. Check the pick arm rolls (tires) in tray 5 and replace if worn. If the problem persists, go to “245.05—Paper Jam service check”.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.