Code: 840.01...840.03
Description: 840.01 Scanner disabled The scanner is disabled and can’t be used. 840.02 Scanner auto disabled 840.03 Scanner cable unplugged
Remedy: Step 1 POR the machine into configuration mode. Go to disable scanner menu item. See gDisable scannerh. Touch Enable ADF/FB.Enabled, and press Submit to save the change. POR the MFP to operating mode. Try running a copy from the ADF and flatbed. Did the 840.xx error reoccur? Go to step 2. Stop. Problem solved.
Step 2 Re.enter the Configuration mode, and scroll to and select the Disable Scanner menu item. Does the screen display ADF disabled or Auto Disabled? Go to step 3. Go to step 8.
Step 3 Check the ADF cable connections on the ADF relay card and connector J17 on the controller board. Also inspect the cable connections J28, J12, J13, and J30 on the controller board. Are the connections properly connected? Go to step 5. Go to step 4.
Step 4 Properly connect the connections on the ADF relay card and controller board. POR the machine into configuration mode. Go to the disable scanner menu item. See “Disable scanner”. Select Enable ADF/FB -Enabled and press Select to save the change. POR the MFP to operating mode. Try running a copy from the ADF and flatbed. Did the 840.xx error reoccur? Go to step 5. Stop. Problem solved.
Step 5 Check the continuity on the ADF cable. Is there continuity? Go to step 7. Go to step 6. Replace the ADF cable. POR the machine into configuration mode. Go to the disable scanner menu item. See“Disable scanner”. Select Enable ADF/FB -Enabled and press Select to save the change. POR the MFP to operating mode. Try running a copy from the ADF and flatbed. Go to step 6. Did the 840.xx error reoccur? Go to step 7. Stop. Problem solved
Step 6 Replace the ADF unit. See “ADF assembly removal”. POR the machine into configuration mode. Go to the disable scanner menu item. See“Disable scanner”. Select Enable ADF/FB -Enabled and press Select to save the change. POR the MFP to operating mode. Run a copy from the flatbed. Did the 840.xx error reoccur? Go to step 8. Stop. Problem solved.
Step 7 Inspect JFBM1, JHS1 and JCCD1 on the controller board. Are the connections properly connected? Go to step 10. Go to step 9.
Step 8 Properly connect all the connections. Did the 840.xx error reoccur? Stop. Problem solved. Go to step 10.
Step 9 Replace the flatbed unit. See “Flatbed scanner assembly removal”. POR the machine into configuration mode. Go to the disable scanner menu item. See“Disable scanner”. Select Enable ADF/FB -Enabled and press Select to save the change. POR the MFP to operating mode. Run a copy from the flatbed. Did the 840.xx error reoccur? Go to step 11. Stop. Problem solved.
Step 10 Replace the controller board. See gController board removalh. Problem solved. Contact second.level support.
Step 2 Re.enter the Configuration mode, and scroll to and select the Disable Scanner menu item. Does the screen display ADF disabled or Auto Disabled? Go to step 3. Go to step 8.
Step 3 Check the ADF cable connections on the ADF relay card and connector J17 on the controller board. Also inspect the cable connections J28, J12, J13, and J30 on the controller board. Are the connections properly connected? Go to step 5. Go to step 4.
Step 4 Properly connect the connections on the ADF relay card and controller board. POR the machine into configuration mode. Go to the disable scanner menu item. See “Disable scanner”. Select Enable ADF/FB -Enabled and press Select to save the change. POR the MFP to operating mode. Try running a copy from the ADF and flatbed. Did the 840.xx error reoccur? Go to step 5. Stop. Problem solved.
Step 5 Check the continuity on the ADF cable. Is there continuity? Go to step 7. Go to step 6. Replace the ADF cable. POR the machine into configuration mode. Go to the disable scanner menu item. See“Disable scanner”. Select Enable ADF/FB -Enabled and press Select to save the change. POR the MFP to operating mode. Try running a copy from the ADF and flatbed. Go to step 6. Did the 840.xx error reoccur? Go to step 7. Stop. Problem solved
Step 6 Replace the ADF unit. See “ADF assembly removal”. POR the machine into configuration mode. Go to the disable scanner menu item. See“Disable scanner”. Select Enable ADF/FB -Enabled and press Select to save the change. POR the MFP to operating mode. Run a copy from the flatbed. Did the 840.xx error reoccur? Go to step 8. Stop. Problem solved.
Step 7 Inspect JFBM1, JHS1 and JCCD1 on the controller board. Are the connections properly connected? Go to step 10. Go to step 9.
Step 8 Properly connect all the connections. Did the 840.xx error reoccur? Stop. Problem solved. Go to step 10.
Step 9 Replace the flatbed unit. See “Flatbed scanner assembly removal”. POR the machine into configuration mode. Go to the disable scanner menu item. See“Disable scanner”. Select Enable ADF/FB -Enabled and press Select to save the change. POR the MFP to operating mode. Run a copy from the flatbed. Did the 840.xx error reoccur? Go to step 11. Stop. Problem solved.
Step 10 Replace the controller board. See gController board removalh. Problem solved. Contact second.level support.