Mã lỗi Lexmark CX510 — Trang 4/5
Code:
Tất cả lỗi (37)
110.01...110.13
121.01...121.42
121.5x...121.9x
126.01
133.1x...133.4x
141.01...141.27
147.01...147.05
171.01
840.01...840.03
841.xx
842.xx
843.00...843.99
846.00...846.07
849.xx
900.xx
910.xx...919.xx
938.01...938.04
950.xx
951.xx
952.xx
953.xx
954.xx
955.xx
956.xx
957.xx
958.xx
959.xx
960.xx
961.xx
962.xx
964.xx
975.xx
976.xx
978.xx
979.xx
982.xx
990.xx
Description: Service Controller Board Controller board failure. ASIC failure.
Remedy: • POR the printer. • If the problem persists, then replace the controller board.
Description: Service NAND Failure Printer has performed more than 100 “shift and reflash” operations as a result of ECC bit corrections.
Remedy: • POR the printer. • If the problem persists, then replace the controller board.
Description: Service Invalid Firmware Controller verification failure of system boot code. 959.0x Service System Board System hardware failure.
Remedy: • Update the firmware. • POR the printer. • If the problem persists, then replace the controller board
Description: Service Memory Error RAM memory error: RAM soldered on the board is bad.
Remedy: • POR the printer. • If the problem persists, then replace the controller board.
Description: Service Memory Failure RAM memory error: slot 1 RAM is bad.
Remedy: • Check RAM in slot 1. • If RAM is ok, then POR the printer. • If the problem persists, then replace the controller board.
Description: Service Memory Failure RAM memory error: slot 2 RAM is bad.
Remedy: • Check RAM in slot 2. • If RAM is ok, then POR the printer. • If the problem persists, then replace the controller board.
Description: Service Emulation Error Download emulation cyclic redundancy check (CRC) failure has occurred. A checksum failure detected in the emulation header or emulation file.
Remedy: The following actions may be taken: 1 Disable the Download Emulation. 2 Program the download emulation into the code overlay SIMM again. 3 If the problem is not resolved replace the code overlay SIMM, and download emulation again.
Description: 975.xx Service Standard Network or 975.xx Service Network Card x Network error: unrecognizable network port.
Remedy: Replace the standard network card or the card in the specified slot.