Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Lexmark MS710 — Trang 11/15

Code: 52

Description: Flash full
Remedy: Try one or more of the following: • From the printer control panel, touch Continue to ignore the message and continue printing. • Delete fonts, macros, and other data stored in the flash memory. • Install a flash memory card with larger capacity. Note: Downloaded fonts and macros not previously stored in the flash memory are deleted.

Code: 53

Description: Unformatted flash
Remedy: Try one or more of the following: • From the printer control panel, press Continue to stop the defragmentation and continue printing. • Format the flash memory device. Note: If the error message remains, then the flash memory device may be defective and need to be replaced.

Code: 54

Description: Network error—communication failure between the controller board and the network port
Remedy: Try one or more of the following: • From the printer control panel, press Continue to confirm. • Unplug the router, then wait for 30 seconds, and then plug it back again. • POR the machine. • Update the network firmware in the printer or print server.

Code: 55

Description: Unsupported option card detected
Remedy: 1 Turn off the printer. 2 Unplug the power cord from the electrical outlet. 3 Remove the unsupported option card from the printer controller board, and then replace it with a supported card. 4 Re.connect the power cord, and then turn the machine on.

Code: 56

Description: USB port disabled
Remedy: Do either of the following: • From the printer control panel, select Continue to clear the message and continue printing without using the specified bin/tray. • Select Reset active bin to reset the bin for a linked set of bins.

Code: 59

Description: Incompatible output bin/tray
Remedy: Do either of the following: • Remove the specified bin. • From the printer control panel, press Continue to clear the message and continue printing without using the specified bin/tray.

Code: 80

Description: 80 Maintenance kit—end of life 80 Maintenance kit—late warning 80 Maintenance kit—low 80 Maintenance kit—nearly low
Remedy: Install maintenance kit. Maintenance kit is near the end of its life.

Code: 81

Description: Roller kit—end of life
Remedy: Install a roller kit.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie