Code :

Code: 901
Description: Engine Flash
This error indicates that the flash which the engine board code is programmed into is bad.
Remedy: Replace the engine board.

Code: 902
Description: General Engine Software
These errors indicate an unrecoverable engine software error.
Remedy: Replace the engine board.

Code: 903
Description: Link Driver Error
These errors indicate an unrecoverable engine software error.
Remedy: Replace the engine board.

Code: 904
Description: Interface Violation by the controller software
These errors indicate an unrecoverable engine software error.
Remedy: Replace the engine board.

Code: 905
Description: Interface Violation by Paperport Device
These errors indicate an unrecoverable engine software error.
Remedy: Replace the engine board.

Code: 906
Description: Controller- Engine Link Driver Error
These errors indicate an unrecoverable engine software error.
Remedy: Replace the engine board.

Code: 910
Description: DC Pick Motor DC Pick Motor Stall
Indications that a Tray 1 paper feed problem has been detected.
Remedy: Tray X option System Board or Compensator Assembly or Autoconnect Cable Check the autoconect cables and connectors for any signs of damage. Replace if necessary. Check the cables for continuity. If incorrect, replace the compensator assembly cable. If the cables, connectors and connections are good, replace the FRUs in the following order: autocompensator assembly option system board

1 2 3 4 > Last ›