Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Lexmark S2455 — Trang 5/7

Code: 943

Description: Controller Font Version
Remedy: Indicates that the controller code and FONT ROM are incompatible.

Code: 944

Description: Controller Board Failure
Remedy: Replace the controller board.

Code: 945

Description: Controller Board Failure - ASIC Failure
Remedy: Replace the controller board.

Code: 946

Description: Controller Board Failure - SRAM Failure
Remedy: Replace the controller board.

Code: 947

Description: Engine Board
Remedy: Replace the engine board.

Code: 953

Description: NVRAM Failure
Indicates the NVRAM Chip on the engine board has failed.
Remedy: Replace the engine board.

Code: 954

Description: NVRAM Failure
Indicates the NVRAM experienced a CRC failure.
Remedy: Replace the engine board.

Code: 956

Description: Configuration ID
Indicates a problem with the Configuration ID.
Remedy: This error occurs because the engine received a configuration ID from the controller software which is not valid for the level of engine code existing in the printer. Setting the configuration ID correctly should fix this error. The ID can be set via the NPA data stream or operator panel. Note: This error is not generated at POR to allow the servicer a method of resetting the configuration ID. However, setting the configuration ID is the only operation that the servicer can perform.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie