Description: Standard USB Port Disabled Displayed when status is requested over the USB port, but the port has been disabled. Once the error has been displayed for the first time, reporting of further errors is suppressed until the menus are entered or the printer is reset.
Remedy: The following actions may be taken: • Press to clear the message. The printer discards any data received on the USB port. • Press until Busy/ Waiting appears. The following are available: - Reset Printer Reset Active Bin
Description: USB Port [x] Disabled Displayed when status is requested over the USB port, but the port has been disabled. Once the error has been displayed for the first time, reporting of further errors is suppressed until the menus are entered or the printer is reset.
Remedy: The following actions may be taken: • Press to clear the message. The printer discards any data received on the USB port. • Press until Busy/ Waiting appears. The following are available: - Reset Printer Reset Active Bin
Description: Invalid Tray Configuration Either no input trays or there are optional trays above the RFID option.
Remedy: 1. Ensure the RFID option is in first position under printer and that there is at least one input tray beneath the RFID option. 2. Check the RFID firmware card, RFID interface card, RFID cable, and RFID option for correct installation. Go to “High capacity input tray (HCIT) pick arm bracket assembly removal”. 3. Replace the RFID UHF option.
Description: Too Many Flash Options This error code displays when too many user flash memory options or too many optional firmware cards have been installed. User can power off and remove extra flash options.
Remedy: 1. Turn off and unplug the printer. 2. Remove the excess flash memory. 3. Plug in the printer, and turn it on.
Description: Too Many Trays Attached This error code displays when too many input trays are attached to the printer. Note: With the RFID option attached, the maximum number of trays is three. Without the RFID option attached, the maximum number is four.
Remedy: 1. Turn off and unplug the printer. 2. Remove the excess trays. 3. Plug in the printer, and turn it on.
Description: Incompatible Duplex An incompatible duplex option is installed. Remove the incompatible duplex option and press to clear the message. Note: If the user installed the incompatible device to satisfy a Check Device Connections/ reattach message, the user should reinstall an associated compatible option or hot unplug the option.
Remedy: 1. Turn off and unplug the printer. 2. Remove the incompatible external duplex unit assembly. 3. Plug in the printer, and turn it on.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.