• Code: 32
• Description: Unsupported Toner Cartridge
• Remedy: This message is displayed when an unsupported print cartridge is installed. Replace the toner cartridge.

• Code: 34
• Description: Short Paper
• Remedy: • press Select ( ) to clear the message and continue printing. The printer does not automatically reprint the page that prompted the message. • Check tray length and width guides to ensure paper is properly fitted in the tray. • Make sure the print job is requesting the correct size of paper. • Adjust the Paper Size setting for the size paper you are using. If MP Feeder Size is set to Universal, make sure the paper is large enough for the formatted data. • Cancel the current job.

• Code: 37
• Description: Insufficient Collation Area
• Remedy: This message is displayed when the printer memory used to store pages is too full to collate the print job. The following actions can be taken: • press Select ( ) to print the portion of the job already stored, and begin collating the rest of the job. • press Menus ( ) to access the Busy/Waiting Menu. The following functions are available. - Cancel Job Note: Menu Lockout does NOT prevent access to the Busy/Waiting Menu.

• Code: 38
• Description: Memory Full
• Remedy: This message is displayed when the printer is processing an incoming job and there is not enough memory available to continue processing the job. The following actions can be taken: • Determine how to make more memory available to your print job by: - Deleting fonts, macros and other data in RAM. - Simplify your print job. - Install additional memory • press Select ( ) to clear the message and continue printing. The job may not print correctly. • press Menus ( ) to access the Busy/Waiting Menu. The following functions may be available: - Cancel Job

• Code: 39
• Description: Complex Page
• Remedy: This message is displayed when a page is too complex to print. The following actions can be taken: • press Select ( ) to clear the message and continue printing. The job may not print correctly. • Simplify the print job. • press Menus ( ) to access the Busy/Waiting Menu. The following functions may be available: - Cancel Job - Reset Printer Note: Menu Lockout does NOT prevent access to the Busy/Waiting Menu.

• Code: 54
• Description: Standard Network Software Error
• Remedy: This message is displayed when the RIP software detects that a network port is installed but cannot establish communications with it. • press Select ( ) to clear the message and continue printing. The job may not print correctly. • Program new firmware for the network interface. • Turn the printer power off and then back on to reset the printer.

• Code: 54
• Description: Network <x> Software Error
• Remedy: The printer disables all communications to the associated network interface. No data may be received or sent from or to the associated interface. The user can program new firmware in the network using the parallel port after this message clears. • press Select ( ) to clear the message and continue printing. The job may not print correctly. • Program new firmware for the network interface. • Turn the printer power off and then back on to reset the printer.

• Code: 56
• Description: Standard USB Port Disabled
• Remedy: This message may appear when data is sent to the printer across a USB port, but the port is disabled. Note: Once the error is displayed the first time, reporting of further errors is suppressed until the printer is reset or menus are entered. The following actions can be taken: • press Select ( ) to clear the message. Any data received on the USB port is discarded. • press Menus ( ) to access the Busy/Waiting Menu. The following functions may be available: - Turn the printer power off and then back on to reset the printer. - Reset Active Bin - Check Supply Levels Make sure the USB Buffer menu item is not set to Disabled. (press Menus to access the Administrative Menus, select Network/Ports, USB Menu, and USB Buffer.)