Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Lexmark X264dn — Trang 13/14

Code: 956.01

Description: Processor overtemp
Remedy: Replace the controller board.

Code: 957.xx

Description: RIP card failure: ASIC failure
Remedy: Replace the controller board.

Code: 958.xx

Description: Printer has performed more than 100 “shift and reflash” operations as a result of ECC bit corrections
Remedy: Replace the controller board.

Code: 959.01, 959.02

Description: 959.01 Controller verification failure of boot code 959.02 Failure to authenticate Signature Verification Code
Remedy: Call the next level of support to update the firmware, or replace the controller board.

Code: 959.03...959.05

Description: 959.03 Signature Verification Code failed to authenticate a code partition. 959.04 Jump to unverified address 959.05 Unknown boot failure
Remedy: Update firmware and call the next level of support, or replace the controller board.

Code: 959.20...960.xx

Description: 959.20 Chipset hardware failure 959.21 Chipset did not respond to command request. 959.22 Challenge secret failure 959.23 Self test failed during initialization. 959.24 EEPROM retention error 959.25 Insufficient device space during HW prog 959.26 Incremental counter reset exceeds maximum value 959.27 Increment count failed due to max value limit 959.28 Invalid SP memory configuration 960.xx RAM memory error: RAM soldered on the controller board is bad
Remedy: Replace the controller board.

Code: 961.xx

Description: RAM memory error: memory card in slot is bad.
Remedy: Replace the memory card.

Code: 964.xx

Description: Download Emulation Cyclic Redundancy Check Error: checksum failure detected in the emulation header or emulation file.
Remedy: Disable the Download Emulation. Program the download emulation into the firmware card again. If this does not resolve the problem, then replace the firmware card and download the emulation again.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie