Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Lexmark X544 — Trang 3/10

Code: 51

Description: Defective flash detected
Remedy: Try one or more of the following: • Touch Continue to clear the message and continue printing. • Cancel the current print job.

Code: 52

Description: Not enough free space in flash memory for resourc
Remedy: Try one or more of the following: • Touch Continue to clear the message and continue printing. Downloaded fonts and macros not previously stored in flash memory are deleted. • Delete fonts, macros, and other data stored in flash memory. • Upgrade to a larger capacity flash memory card.

Code: 53

Description: Unformatted flash detected
Remedy: Try one or more of the following: • Touch Continue to stop the defragment operation and continue printing. • Format the flash memory. If the error message remains, the flash memory may be defective and require replacing.

Code: 54

Description: Standard network software error
Remedy: Try one or more of the following: • Touch Continue to continue printing. • Turn the printer off and then back on to reset the printer. • Upgrade (flash) the network firmware in the printer or print server.

Code: 54

Description: Network [x] software error
Remedy: Try one or more of the following: • Touch Continue to continue printing. • Turn the printer off, wait for about 10 seconds, and then turn the printer back on. • Upgrade (flash) the network firmware in the printer.

Code: 56

Description: Standard USB port disabled
Remedy: Try one or more of the following: • Touch Continue to clear the message. The printer discards any data received through the USB port. • Make sure the USB Buffer menu item is not set to Disabled.

Code: 58

Description: Too many flash options installed
Remedy: 1. Turn the printer off. 2. Unplug the power cord from the wall outlet. 3. Remove the excess flash memory. 4. Connect the power cord to a properly grounded outlet. 5. Turn the printer back on.

Code: 58

Description: Too many trays attached
Remedy: 1. Turn the printer off. 2. Unplug the power cord from the wall outlet. 3. Remove the additional trays. 4. Connect the power cord to a properly grounded outlet. 5. Turn the printer back on.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie