Description: Configuration change, some held jobs were lost
Remedy: Model X646e only. The MFP fails to restore held jobs due to configuration changes. The message appears once. Some held jobs are not restored. They stay on the hard disk and are inaccessible.
Remedy: Model X646e only. The MFP detects an excess of hard disks installed. 1. Turn the MFP off. 2. Unplug the power cord from the wall outlet. 3. Remove the excess hard disks. 4. Connect the power cord to a properly grounded outlet. 5. Turn the MFP on.
Remedy: The MFP detects an excess of optional flash memory cards installed. Touch Continue to clear the message and ignore the extra optional flash memory cards. The message occurs again unless the excess optional flash memory cards are removed. 1. Turn the MFP off. 2. Unplug the power cord from the wall outlet. 3. Remove the excess flash memory. 4. Connect the power cord to a properly grounded outlet. 5. Turn the MFP on.
Remedy: The MFP detects that too many optional drawers and their matching trays are installed. 1. Turn the MFP off. 2. Unplug the power cord from the wall outlet. 3. Remove the additional drawers. 4. Connect the power cord to a properly grounded outlet. 5. Turn the MFP on.
Remedy: An unsupported optional duplex unit is attached to the MFP. Remove the optional duplex unit. The MFP ceases normal functions until the optional duplex unit is removed. Touch Continue to clear the message once the optional duplex unit is removed.
Remedy: An unsupported optional envelope feeder is attached to the MFP. Remove the optional envelope feeder. The MFP ceases normal functions until the optional envelope feeder is removed. Touch Continue to clear the message once the optional envelope feeder is removed.
Remedy: An unsupported optional drawer and its matching tray are attached to the MFP. Remove the optional drawer. The MFP ceases normal functions until the optional drawer is removed. Touch Continue to clear the message once the optional drawer is removed.
Remedy: Model X646e only. The MFP detects a defective hard disk. 1. Turn the MFP off. 2. Unplug the power cord from the wall outlet. 3. Remove the defective hard disk. 4. Install a new hard disk. 5. Connect the power cord to a properly grounded outlet. 6. Turn the MFP on.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.