Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Lexmark X644e — Trang 9/14

Code: 904.xx

Description: Interface violation by RIP These errors indicate an unrecoverable system software error.
Remedy: Replace the system board.

Code: 905.xx

Description: Interface violation by Paperport device These errors indicate an unrecoverable system software error.
Remedy: Replace the system board.

Code: 906.xx

Description: RIP interface driver error These errors indicate an unrecoverable system software error.
Remedy:

Code: 910.xx

Description: DC pick motor acceleration stall (autocompensator motor). • Check autocompensator cable connectors • Check autocompensator for binds
Remedy: 1 Alignment assembly Check to ensure the alignment assembly is correctly attached to the left side frame and the mounting screws are tight. Check the alignment assembly for worn rollers, contaminated rollers, or binds. Replace the alignment assembly if any problem is found. 2 Inner deflector Check the inner paper deflector for correct installation. If the deflector is bowed or not fitting correctly, replace the deflector.

Code: 911.00

Description: DC pick motor excessive PWM • Check system board • Check autocompensator motor
Remedy: 1 Alignment assembly Check to ensure the alignment assembly is correctly attached to the left side frame and the mounting screws are tight. Check the alignment assembly for worn rollers, contaminated rollers, or binds. Replace the alignment assembly if any problem is found. 2 Inner deflector Check the inner paper deflector for correct installation. If the deflector is bowed or not fitting correctly, replace the deflector.

Code: 912.00

Description: DC pick motor underspeed error • Check system board • Check autocompensator
Remedy: 1 Alignment assembly Check to ensure the alignment assembly is correctly attached to the left side frame and the mounting screws are tight. Check the alignment assembly for worn rollers, contaminated rollers, or binds. Replace the alignment assembly if any problem is found. 2 Inner deflector Check the inner paper deflector for correct installation. If the deflector is bowed or not fitting correctly, replace the deflector.

Code: 913.00

Description: DC pick motor overspeed error • Check system board • Check autocompensator
Remedy: 1 Alignment assembly Check to ensure the alignment assembly is correctly attached to the left side frame and the mounting screws are tight. Check the alignment assembly for worn rollers, contaminated rollers, or binds. Replace the alignment assembly if any problem is found. 2 Inner deflector Check the inner paper deflector for correct installation. If the deflector is bowed or not fitting correctly, replace the deflector.

Code: 914.00

Description: DC pick motor no encoder feedback Check autocompensator assembly
Remedy: 1 Alignment assembly Check to ensure the alignment assembly is correctly attached to the left side frame and the mounting screws are tight. Check the alignment assembly for worn rollers, contaminated rollers, or binds. Replace the alignment assembly if any problem is found. 2 Inner deflector Check the inner paper deflector for correct installation. If the deflector is bowed or not fitting correctly, replace the deflector.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie