Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Lexmark X658 — Trang 12/20

Code: 922.82

Description: Fuser warm-up failure Fuser type = 2 Fuser page count has exceeded life. The fuser hot roll does not reach operating temperature after increasing interpage gap.
Remedy: Replace the fuser unit assembly

Code: 923.00

Description: Fuser over temperature failure. Fuser type = 1 The fuser hot roll has exceeded the proper operating temperature
Remedy: 1. Turn the machine off/on and ensure the fuser unit assembly is properly installed. 2. Ensure the proper voltage fuser is installed in the machine. 3. Replace the fuser unit assembly

Code: 923.01

Description: Fuser over temperature failure. Fuser type = 1 The fuser hot roll has exceeded the proper operating temperature.
Remedy: 1. Turn the machine off/on and ensure the fuser unit assembly is properly installed. 2. Ensure the proper voltage fuser is installed in the machine. 3. Replace the fuser unit assembly

Code: 923.25

Description: Fuser over temperature failure. Fuser type = 2 The fuser hot roll has exceeded the proper operating temperature.
Remedy: 1. Turn the machine off/on and ensure the fuser unit assembly is properly installed. 2. Ensure the proper voltage fuser is installed in the machine. 3. Replace the fuser unit assembly

Code: 923.26

Description: Fuser over temperature failure. Fuser type = 2 The fuser hot roll has exceeded the proper operating temperature.
Remedy: 1. Turn the machine off/on and ensure the fuser unit assembly is properly installed. 2. Ensure the proper voltage fuser is installed in the machine. 3. Replace the fuser unit assembly

Code: 923.50

Description: Fuser over temperature failure. Fuser type = 1 The fuser hot roll has exceeded the proper operating temperature.
Remedy: Replace the fuser unit assembly

Code: 923.51

Description: Fuser over temperature failure. Fuser type = 1 The fuser hot roll has exceeded the proper operating temperature.
Remedy: Replace the fuser unit assembly

Code: 923.75

Description: Fuser over temperature failure. Fuser type = 2 The fuser hot roll has exceeded the proper operating temperature.
Remedy: Replace the fuser unit assembly
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie