Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Lexmark X738dte — Trang 5/20

Code: 37

Description: Insufficient memory, Some Held Jobs Were Not Restored
Remedy: • The printer deleted some held jobs in order to process current jobs. • Touch Continue to clear the message. • If this does not fix the problem, replace the system board.

Code: 37

Description: Insufficient memory, Some Held Jobs Will Not Be Restored
Remedy: • The printer was unable to restore some or all of the confidential or held jobs on the hard disk. • Touch Continue to clear the message. • If this message occurs again, replace the hard drive. • If this does not fix the problem, replace the system board.

Code: 37

Description: Insufficient Defrag Memory New
Remedy: There is insufficient memory to perform the Flash Memory Defragment operation. The user can: • Delete font, macros, and other data in memory. • Install additional printer memory.

Code: 38

Description: Memory Full
Remedy: The following options are available: • Touch Continue to clear the message and continue printing. The job may not print correctly. • Cancel the current job. • Install additional printer memory. • If this does not fix the problem, replace the system board.

Code: 39

Description: Complex Page
Remedy: The page is too complex to print. Options are: • Touch Continue to continue. The job may not print correctly. • Cancel the job. • Additional memory may fix the problem.

Code: 50

Description: PPDS Font Error
Remedy: • Touch Continue to clear the message and continue printing. The job may not print correctly. • Cancel the current job. • If this does not fix the problem, replace the system board.

Code: 51

Description: Defective Flash
Remedy: • Touch Continue to clear the message and continue printing. • Install different flash memory before downloading any resources to flash. • If this does not fix the problem, replace the system board.

Code: 52

Description: Flash Full
Remedy: • Touch Continue to clear the message and continue printing. Note: Downloaded fonts and macros not previously stored in flash memory are deleted. • Delete fonts, macros, and other data stored in flash memory. • Install a larger capacity flash memory card. • If this does not fix the problem, replace the system board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie