Code :

Code: 57
Description: Configuration Change Held Jobs May Not Be Restored
Remedy: Configuration changes may be: • Code version changes • Paper handling options removed • The disk was installed from a different model or speed of printer.

Code: 58
Description: Too Many Flash Options
Remedy: Too many flash options are installed. To continue: 1. Turn off and unplug the printer. 2. Remove the excess flash memory. 3. Plug in the printer, and turn it on. If this does not fix the problem, replace the system board.

Code: 58
Description: Too Many Trays Attached
Remedy: 1. Turn off and unplug the printer. 2. Remove options until the supported number of options for that model. Models C734 supports three options and models C736 supports four options. 3. Plug in the printer, and turn it on. If this does not fix the problem, replace the system board

Code: 59
Description: Incompatible Tray <x>
Remedy: There is an incompatible tray. To remove the option: 1. Turn off and unplug the printer. 2. Remove all option trays. 3. Install one option, plug in the printer and turn it on. 4. Continue adding one option at a time and checking whether the error occurs. 5. Install all options except the one identified as a problem. - If no problem occurs, replace the option. - If the same error occurs, replace the system board. 6. Plug in and power on

Code: 61
Description: Defective Disk
Remedy: • Touch Continue to clear the message and continue printing. • Install a different hard disk before performing any operations that require a hard disk. • If this does not fix the problem, replace the system board.

Code: 62
Description: Disk full
Remedy: • Touch Continue to clear the message and continue processing. Note: Any information not previously stored on the hard disk is deleted. • Delete fonts, macros, and other data stored on the hard disk. • Install a larger hard disk. • If this does not fix the problem, replace the system board.

Code: 63
Description: Unformatted disk
Remedy: • Touch Continue to clear the message and continue printing. • Format the disk. • If the error message remains, replace the hard disk. • If this does not fix the problem, replace the system board

Code: 64
Description: Unsupported disk format
Remedy: • Touch Continue to clear the message and continue printing. • Format the disk. • If the error message remains, replace the hard disk. • If this does not fix the problem, replace the system board.