• Code: 37
• Description: Insufficient memory for Flash Memory Defragment operation
• Remedy: • Touch Continue to stop the defragment operation and continue printing. • Delete fonts, macros, and other data in printer memory. • Install additional printer memory. • If this does not fix the problem, replace the system.

• Code: 37
• Description: Insufficient memory, Some Held Jobs Were Not Restored
• Remedy: • The printer deleted some held jobs in order to process current jobs. • Touch Continue to clear the message. • If this does not fix the problem, replace the system board.

• Code: 37
• Description: Insufficient memory, Some Held Jobs Will Not Be Restored
• Remedy: • The printer was unable to restore some or all of the confidential or held jobs on the hard disk. • Touch Continue to clear the message. • If this message occurs again, replace the hard drive. • If this does not fix the problem, replace the system board.

• Code: 37
• Description: Insufficient Defrag Memory New
• Remedy: There is insufficient memory to perform the Flash Memory Defragment operation. The user can: • Delete font, macros, and other data in memory. • Install additional printer memory.

• Code: 38
• Description: Memory Full
• Remedy: The following options are available: • Touch Continue to clear the message and continue printing. The job may not print correctly. • Cancel the current job. • Install additional printer memory. • If this does not fix the problem, replace the system board.

• Code: 39
• Description: Complex Page
• Remedy: The page is too complex to print. Options are: • Touch Continue to continue. The job may not print correctly. • Cancel the job. • Additional memory may fix the problem.

• Code: 50
• Description: PPDS Font Error
• Remedy: • Touch Continue to clear the message and continue printing. The job may not print correctly. • Cancel the current job. • If this does not fix the problem, replace the system board.

• Code: 51
• Description: Defective Flash
• Remedy: • Touch Continue to clear the message and continue printing. • Install different flash memory before downloading any resources to flash. • If this does not fix the problem, replace the system board.