Các lỗi thường gặp

Code :
  • Code: 962
  • Description: Memory Error
  • Causes: The RAM in slot 2 on the RIP board is bad. Replace the failing RAM card.
  • Code: 964
  • Description: Emulation Error
  • Causes: A failure within the download emulation CRC which is programmed into the RIP board. To resolve the problem, a servicer may disable the download emulation by entering the Configuration Menu and set the Download Emulation to "Disabled." The download emulation may be reinstalled at that point. If the problem persists, the download emulator may be faulty and should be replaced.
  • Code: 975
  • Description: Network Card
  • Causes: The network port is unrecognizable. For printers equipped with (standard) network circuitry on the RIP board, replace the RIP board. For printers equipped with an optional network card, replace the failing card.
  • Code: 976
  • Description: Network Card
  • Causes: An unrecoverable software error in the network port. For printers equipped with (standard) network circuitry on the RIP board, replace the RIP board. For printers equipped with an optional network card, replace the failing card.
  • Code: 978
  • Description: Network Card
  • Causes: A bad checksum while programming the network port. For printers equipped with (standard) network circuitry on the RIP board, replace the RIP board. For printers equipped with an optional network card, replace the failing card.
  • Code: 979
  • Description: Network Card
  • Causes: Flash parts failed while programming the network port. For printers equipped with (standard) network circuitry on the RIP board, replace the RIP board. For printers equipped with an optional network card, replace the failing card.
  • Code: 980
  • Description: Duplex Comm.
  • Causes: A communication error occurred between the base printer and the optional duplex unit. Check the installation of the duplex unit, particularly the electrical connection. If installed correctly, remove the duplex unit to see if the error message goes away after rebooting. If the problem goes away, replace the duplex unit. If the problem persists, replace the RIP board.
 < 1 2 3
popup

Số lượng:

Tổng tiền:

Danh mục