• Code: 980.01
• Description: Service tray 5 comm. Tray 5 HCF communication failure
• Remedy: A communication error occurred between the printer engine card assembly and the HCF controller card assembly.

• Code: 980.02
• Description: Service finisher error Printer engine card-finisher communication failure
• Remedy: A communication error occurred between the printer engine card assembly and the finisher.

• Code: 980.03
• Description: Service standard bin comm. Exit interface card assembly, communication failure A communication error occurred between the printer engine card assembly and the exit interface card assembly.
• Remedy: 1 Check the exit interface card assembly for proper connection. Go to step 2. Replace the connection. 2 Check the connection between the exit interface card assembly P430 and the LVPS assembly P526. Are the cards connected properly? Go to step 3. Replace the connection. 3 Perform a print test. Does the error continue? Replace the exit interface card assembly. Go to “Exit interface card assembly removal”. Problem solved. 4 Perform a print test. Does the error continue? Replace the printer engine cord assembly. Go to “Printer engine card assembly removal”. Problem solved.

• Code: 980.04
• Description: Service duplex comm. Duplex controller card assembly communication failure A communication error occurred between the printer engine card assembly and the duplex controller card assembly
• Remedy: 1 Check the duplex unit for proper installation. Remove duplex unit assembly, and reinstall it. Perform a two sided print test. Does the error still occur? Go to step 2. Problem solved. 2 Check the duplex controller card assembly and printer engine card assembly for proper connection. Are the connections on the duplex controller card assembly and the connector P417 on the printer engine card assembly connected? Go to step 3. Replace the connection. 3 Perform a 2 sided print test. Does the error still occur? Replace the duplex controller card assembly. Go to “Duplex controller card assembly removal”. Go to step 4. Problem solved. 4 Perform a 2 sided print test. Does the error still occur? Replace the printer engine card assembly. Go to “Printer engine card assembly removal”. Problem solved.

• Code: 980.05
• Description: Service Flicker comm. Engine flicker communication failure A communication error has occurred in the printer engine card assembly.
• Remedy: 1 Perform a POR. Does the error occur when the power is turned off/on? Go to step 2. Perform several print tests. If the problem remains, go to step 2. 2 Turn the printer off for 60 seconds. Does the error occur when the power is turned off/on again? Replace the printer engine card assembly. Go to “Printer engine card assembly removal”. Problem solved.

• Code: 981.00
• Description: Service finisher error Stacker bin failure
• Remedy: The sensor (stacker bin level) is not turned on within the specified period after the stacker bin starts rising.

• Code: 981.01
• Description: Service finisher error Stacker bin upper limit failure
• Remedy: The stacker bin abnormally rises beyond the specified upper limit position (stacker bin level).

• Code: 981.02
• Description: Service finisher error Stacker bin lower limit failure
• Remedy: The stacker bin abnormally lowers beyond the specified lower limit position (full stack).