Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Lexmark X952 — Trang 15/24

Code: 51

Description: Defective flash detected
Remedy: Try one or more of the following: • Touch Continue to clear the message and continue printing. • Cancel the current print job.

Code: 52

Description: Not enough free space in flash memory for resources
Remedy: Try one or more of the following: • Touch Continue to clear the message and continue printing. Downloaded fonts and macros not previously stored in flash memory are deleted. • Delete fonts, macros, and other data stored in flash memory. • Upgrade to a larger capacity flash memory card.

Code: 53

Description: Unformatted flash detected
Remedy: Try one or more of the following: • Touch Continue to stop the defragment operation and continue printing. • Format the flash memory. If the error message remains, the flash memory may be defective and require replacing.

Code: 54

Description: Network [x] software error
Remedy: Try one or more of the following: • Touch Continue to continue printing. • Turn the printer off, wait for about 10 seconds, and then turn the printer back on. • Upgrade (flash) the network firmware in the printer.

Code: 55

Description: Unsupported option in slot [x]
Remedy: 1. Turn the printer off. 2. Unplug the power cord from the wall outlet. 3. Remove the unsupported option card from the printer system board, and then replace it with a supported card. 4. Connect the power cord to a properly grounded electrical outlet. 5. Turn the printer back on.

Code: 56

Description: Parallel port [x] disabled
Remedy: Try one or more of the following: • Touch Continue to clear the message. The printer discards any data received through the parallel port. • Make sure the Parallel Buffer menu item is not set to Disabled.

Code: 56

Description: Standard USB port disabled
Remedy: Try one or more of the following: • Touch Continue to clear the message. The printer discards any data received through the USB port. • Make sure the USB Buffer menu item is not set to Disabled.

Code: 58

Description: Too many disks installed
Remedy: 1. Turn the printer off. 2. Unplug the power cord from the wall outlet. 3. Remove the excess disks. 4. Connect the power cord to a properly grounded electrical outlet. 5. Turn the printer back on.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie