Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Lexmark X952 — Trang 4/24

Code: 120.02

Description: Service fuser error Fuser pressure roll retract motor failure An error was detected at the fuser pressure rolls and motor.
Remedy: 1 Check the fuser pressure roll retract motor. Is the above component properly connected? Go to step 2. Replace the connections. 2 Replace the fuser pressure roll retract motor. Go to “Fuser pressure roll retract motor removal”. Does the error remain? Go to step 3. Problem resolved 3 Check the fuser assembly. Is the above component properly connected? Go to step 2. Replace the connections. 4 Replace the fuser assembly. Go to “Fuser assembly removal”. Does the error remain? Go to step 3. Problem resolved 5 POR the machine. Does the error continue? Replace the lower engine PCBA. Go to “Lower engine PCBA removal”. Go to step 6. Problem resolved 6 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved

Code: 121.01

Description: Service fuser error Encoder pulse fail No change was detected on the speed of the belt for more than 1 second.
Remedy: 1 Check the fuser assembly. Is the above component properly connected? Go to step 2. Replace the connections. 2 Replace the fuser assembly. Go to “Fuser assembly removal”. Does the error remain? Go to step 3. Problem resolved 3 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved

Code: 121.03

Description: Service fuser error Heat belt (center) disconnection error Open circuit is detected at the fuser heat belt.
Remedy: 1 Check the fuser assembly. Is the above component properly connected? Go to step 2. Remove foreign particles, and replace the connections. 2 Replace the fuser assembly. Go to “Fuser assembly removal”. Does the error remain? Go to step 3. Problem resolved 3 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved

Code: 121.04

Description: Service fuser error Heat belt (center) overheat error Temperature in the heat belt has exceeded the limit.
Remedy: 1 Check the fuser assembly. Is the above component properly connected? Go to step 2. Remove foreign particles, and replace the connections. 2 Replace the fuser assembly. Go to “Fuser assembly removal”. Does the error remain? Go to step 3. Problem resolved 3 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved

Code: 121.05

Description: Service fuser error Heat belt (rear) disconnection error Open circuit is detected at the fuser heat belt.
Remedy: 1 Check the fuser assembly. Is the above component properly connected? Go to step 2. Remove foreign particles, and replace the connections. 2 Replace the fuser assembly. Go to “Fuser assembly removal”. Does the error remain? Go to step 3. Problem resolved 3 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved

Code: 121.06

Description: Service fuser error Heat belt (rear) overheat error Temperature in the heat belt has exceeded the limit.
Remedy: 1 Check the heat roll. Is the heat roll free of any media or foreign particles? Go to step 2. Remove foreign particles, and replace the connections. 2 Check the fuser assembly. Is the above component properly connected? Go to step 3. Replace the connections. 3 Replace the fuser assembly. Go to “Fuser assembly removal”. Does the error remain? Go to step 4. Problem resolved 4 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved

Code: 121.07

Description: Service fuser error Heat belt (center) temperature increase failure The temperature is late in reaching a specified temperature within the specified time.
Remedy: 1 Check the fuser assembly. Is the above component properly connected? Go to step 2. Remove foreign particles, and replace the connections. 2 Replace the fuser assembly. Go to “Fuser assembly removal”. Does the error remain? Go to step 3. Problem resolved 3 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved

Code: 121.08

Description: Service fuser error Heat belt (rear) temperature increase failure The temperature is late in reaching a specified temperature within the specified time.
Remedy: 1 Check the fuser assembly. Is the above component properly connected? Go to step 2. Remove foreign particles, and replace the connections. 2 Replace the fuser assembly. Go to “Fuser assembly removal”. Does the error remain? Go to step 4. Problem resolved 3 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie