Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Lexmark X952dte — Trang 13/24

Code: 24x

Description: Paper Jam Check Tray [x]
Remedy: Jam is detected at the media trays.

Code: 250

Description: Paper Jam Check Manual Feeder
Remedy: Jam is detected at the MPF.

Code: 281

Description: Paper Jam
Remedy: Jam is detected at the fuser or the bridge unit.

Code: 28y.xx

Description: paper jams
Remedy: Jam is detected at the ADF.

Code: 31.xx

Description: Missing or defective [color] cartridge
Remedy: Try one or more of the following: 1. Remove and reinstall the specified print cartridge. For instructions on removing a print cartridge, touch More Information. 2. Touch Continue to clear the message. Note: If the message is not cleared, then replace the defective print cartridge.

Code: 32.xx

Description: [color] cartridge part number unsupported by device
Remedy: Remove the unsupported toner cartridge, and then install a supported one.

Code: 34

Description: Incorrect paper size, check [paper source]
Remedy: Try one or more of the following: • Load the appropriate paper or specialty media in the proper tray. • Confirm that the wheel on Tray 1 is set to the paper size loaded in the tray. Make sure the paper size matches the document you are trying to print. • Touch Continue to clear the message and print using a different tray. • Check the tray length and width guides and make sure the paper is loaded properly in the tray. • Make sure the correct paper size and type are specified on the Print Properties or Print dialog settings. • Check that the paper size is correctly set. For example, if the MP Feeder Size is set to Universal, make sure the paper is large enough for the data being printed. • Cancel the print job.

Code: 34

Description: Incorrect paper type, check [paper source]
Remedy: Try one or more of the following: • Load the appropriate paper or specialty media in the proper tray. • Confirm that the wheel on Tray 1 is set to the paper type loaded in the tray. Make sure the paper type matches the document you are trying to print. • Touch Continue to clear the message and print using a different tray. • Check the tray length and width guides and make sure the paper is loaded properly in the tray. • Make sure the correct paper size and type are specified on the Print Properties or Print dialog settings. • Check that the paper type is correctly set. For example, if the MP Feeder Type is set to Universal, then make sure the paper is large enough for the data being printed. • Cancel the print job.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie