• Code: 35
• Description: Insufficient memory to support Resource Save feature
• Remedy: Try one or more of the following: • Touch Continue to disable Resource Save and continue printing. • To enable Resource Save after receiving this message, make sure the link buffers are set to Auto, and then exit the menus to activate the link buffer changes. When Ready appears, enable Resource Save. • Install additional memory.

• Code: 36
• Description: Printer service required
• Remedy: Touch Continue to clear the message or contact customer support.

• Code: 37
• Description: Insufficient memory to collate job
• Remedy: Try one or more of the following: • Touch Continue to print the portion of the job already stored and begin collating the rest of the print job. • Cancel the current print job.

• Code: 38
• Description: Memory full
• Remedy: Try one or more of the following: • Touch Cancel job to clear the message. • Install additional printer memory.

• Code: 39
• Description: Complex page, some data may not have printed
• Remedy: Try one or more of the following: • Touch Continue to clear the message and continue printing. • Cancel the current print job. • Install additional printer memory.

• Code: 455
• Description: Staple Jam
• Remedy: A jam is detected at the stapler.

• Code: 4yy.xx
• Description: Paper Jam Check [area]
• Remedy: Jam is detected at the bridge unit.

• Code: 50
• Description: PPDS font error
• Remedy: Try one or more of the following: • Touch Continue to clear the message and continue printing. • The printer cannot find a requested font. From the PPDS menu, select Best Fit, and then select On. The printer will find a similar font and reformat the affected text. • Cancel the current print job.