Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Lexmark XC6152 — Trang 19/21

Code: 52

Description: The flash memory is insufficient.
Remedy: Step 1 Navigate to Settings > Print settings > Utilities Menu > Format Flash > Yes. Does the problem remain? Go to step 3. Go to step 2. Step 2 Navigate to Settings > Print > Job Accounting > Log Near Full Level. Make sure that the value is set to maximum. Does the problem remain? Go to step 3. The problem is solved. Step 3 If applicable, make sure that the optional memory card is supported. Does the problem remain? Go to step 4. The problem is solved. Step 4 Check the controller board pins for damage, and replace if necessary. See “Controller board removal”. Does the problem remain? Go to step 5. The problem is solved. Step 5 Make sure that the firmware version is the latest, and update if necessary. Does the problem remain? Contact the next level of support. The problem is solved.

Code: 53

Description: The flash memory is unformatted.
Remedy: Step 1 Navigate to Settings > Print settings > Job Accounting Menu Settings > Log Near Full Level. Make sure that the value is set to maximum. Does the problem remain? Go to step 2. The problem is solved. Step 2 If applicable, make sure that the optional memory card is supported. Does the problem remain? Go to step 3. The problem is solved. Step 3 Check the controller board pins for damage, and replace if necessary. See “Controller board removal”. Does the problem remain? Go to step 4. The problem is solved. Step 4 Make sure that the firmware version is the latest, and update if necessary. Does the problem remain? Contact the next level of support. The problem is solved.

Code: 54

Description: The printer was not able to communicate with the network.
Remedy:

Code: 55

Description: The internal option installed is unsupported.
Remedy: Step 1 If applicable, make sure that the option cards are supported. Does the problem remain? Go to step 2. The problem is solved. Step 2 Check the controller board pins for damage, and replace if necessary. See “Controller board removal”. Does the problem remain? Go to step 3. The problem is solved. Step 3 Make sure that the firmware version is the latest, and update if necessary. Does the problem remain? Contact the next level of support. The problem is solved.

Code: 56

Description: The parallel port, serial port, or standard USB port is disabled.
Remedy: Step 1 a Make sure that the cables connected to ports are properly installed. b Check the cables for damage, and replace if necessary. Does the problem remain? Go to step 2. The problem is solved. Step 2 Enter the Network/Ports menu and make sure that the applicable port settings are enabled. Does the problem remain? Go to step 3. The problem is solved. Step 3 If applicable, make sure that the option card is supported. Does the problem remain? Go to step 4. The problem is solved. Step 4 Check the controller board pins for damage, and replace if necessary. See “Controller board removal”. Does the problem remain? Go to step 5. The problem is solved. Step 5 Make sure that the firmware version is the latest, and update if necessary. Does the problem remain? Contact the next level of support. The problem is solved.

Code: 58

Description: The disks, trays, or bins installed are too many.
Remedy: Step 1 Reset the printer, and then resend the print job. Does the problem remain? Go to step 2. The problem is solved. Step 2 If applicable, make sure that the internal option is supported. Does the problem remain? Go to step 3. The problem is solved. Step 3 a If applicable, remove all internal options. b Reset the printer, and then resend the print job. Does the problem remain? Go to step 6. Go to step 4. Step 4 Check if the number of internal options installed is allowed, and remove the excess option. Does the problem remain? Go to step 5. The problem is solved. Step 5 Check if the number of input options installed is allowed, and remove the excess option. Does the problem remain? Go to step 6. The problem is solved. Step 6 Check the controller board pins for damage, and replace if necessary. See “Controller board removal”. Does the problem remain? Contact the next level of support. The problem is solved.

Code: 59

Description: The input option or output option is incompatible.
Remedy: Step 1 Warning—Potential Damage: Do not perform this step if the printer is on. a Reseat the hardware option cables. b Check the cables for damage, and replace if necessary. Does the problem remain? Go to step 2. The problem is solved. Step 2 Check the firmware version of the hardware option if it is supported by the engine firmware. Update the firmware if necessary. Note: Contact the next level of support for the correct firmware version. Does the problem remain? Go to step 3. The problem is solved. Step 3 Check the hardware option controller board pins for damage, and replace if necessary. Does the problem remain? Contact the next level of support. The problem is solved.

Code: 61, 62

Description: 61 The hard disk is defective. 62 The hard disk is full.
Remedy: Step 1 Delete unnecessary files: • Navigate to Settings > Print Settings > Utilities Menu > Delete Downloads on Disk > Yes. • Enter the Configuration menu, and then navigate to Settings > Jobs on Disk > Delete. Does the problem remain? Go to step 2. The problem is solved. Step 2 Make sure that the firmware version is the latest. Note: The latest firmware versions are available on the Technical service bulletins at support.lexmark.com. Does the problem remain? Go to step 3. The problem is solved. Step 3 a Make sure that the hard disk cable is properly installed. b Check the cable for damage, and replace if necessary. Does the problem remain? Go to step 4. The problem is solved. Step 4 a Make sure that the hard disk is properly installed. b Check the hard disk for damage, and replace if necessary. Does the problem remain? Go to step 5. The problem is solved. Step 5 Check the controller board pins for damage, and replace if necessary. See “Controller board removal”. Does the problem remain? Contact the next level of support. The problem is solved.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie