Mã lỗi Mutoh ValueJet 1304W — Trang 5/6
Display: E 080 error Junction error
Description: Abnormal condition in the serial communicatio n between Junction board and Controller board.
Display: E 081 error CR power supply
Description: CR origin cannot be detected.
Display: E 082 error Wiper sensor
Description: Abnormal condition in Wiper sensor
Display: E083 error X2 residual electrical charge
Description: Overload condition in media feed motor (X-axis) during the printer operation.
Display: E084 error Head identification
Description: Indicates that the print head is not a genuine one.
Display: E085 error Head overheat
Description: Abnormal condition in the head driver.
Display: E086 error Head OVP
Description: Abnormal condition in print head.
Display: E 087 error Head transistor Th.
Description: Abnormal condition in head transistor.