Mã lỗi Mutoh ValueJet 1604W — Trang 5/6
Display: E 081 error CR origin
Description: CR_HP detection is not possible.
Display: E 082 error wiper sensor
Description: Abnormal condition in wiper sensor.
Display: E 084 error head identification
Description: Installed head is incorrect.
Display: E 085 error head overheat
Description: Abnormal condition in head driver.
Display: E 086 error head OVP
Description: Abnormal condition in head driver.
Display: E 087 error head transistor thermistor
Description: Abnormal condition in head transistor
Display: E090Err Heater Volt.
Description: • The input voltage of AC inlet may be too high. • HEATER CONT board assembly may be damaged.
Display: E 097 error NVRAM
Description: Abnormal condition in NVRAM.