Các lỗi thường gặp

Code :
  • Code: E080
  • Display: E080 Error Junction
  • Description: An anomaly is detected in serial communication between HEATER JUNCTION board assembly and HEATER CONTROL board assembly during printer operation.
  • Code: E081
  • Display: E081 Error CR Origin
  • Description: CR_HP cannot be detected.
  • Code: E082
  • Display: E082 Err Wiper Sns.
  • Description: An anomaly is detected in Wiper sensor.
  • Code: E085
  • Display: E085 Error Head Heat
  • Description: An anomaly is detected in Head driver.
  • Code: E087
  • Display: E087 Error H transistor Th.
  • Description: An anomaly is detected in Head transistor.
  • Code: E090
  • Display: E090 Error Heater Volt.
  • Description: Displayed when voltage exceeds the threshold level of 200V start up even though the printer was started with the voltage of 100V on HEATER CONTROL board assembly.
  • Code: E097
  • Display: E097 Error NVRAM.
  • Description: An anomaly is detected in NVRAM.
  • Code: E124
  • Display: E124 Error PG Origin
  • Description: An anomaly is detected in PG origin sensor or PG motor.
‹ First  < 2 3 4 5 6 7 > 
popup

Số lượng:

Tổng tiền:

Danh mục