Danh mục sản phẩm

Code :

Code: E078
Display: E078 Err After Heat
Description: An anomaly is detected in After heater system (Thermistor, Heater).

Code: E079
Display: E079 Err Board Commu
Description: An anomaly is detected in the serial communication between MAIN Board Assy and HEATER CONTROL Board Assy during printer operation.

Code: E081
Display: E081 Err CR Origin
Description: CR_HP cannot be detected.

Code: E082
Display: E082 Err Wiper Sns.
Description: An anomaly is detected in Wiper sensor.

Code: E085
Display: E085 Err Head Heat
Description: An anomaly is detected in Head driver.

Code: E087
Display: E087 Err H trans Th.
Description: An anomaly is detected in Head transistor.

Code: E090
Display: E090 Err Heater Volt
Description: Displayed when voltage exceeds the threshold level of 200V start up even though the printer was started with the voltage of 100V on HEATER CONTROL board Assy.

Code: E092
Display: E092 Err CR Overload
Description: An overload condition is detected in CR motor (Yaxis) during printer operation.

‹ First < 2 3 4 5 6 7 8 >

0