Description: Parity error is caused in receiving a status from IOT
Causes: It is caused when receiving NAK which reporting the communication fail. Check the connection of HVPS/MCU connect harness. If the trouble is still caused, replace HVPS/MCU PWB.
Description: Overrun is caused in receiving a status from IOT
Causes: It is caused when receiving NAK which reporting the communication fail.Check the connection of HVPS/MCU connect harness. If the trouble is still caused, replace HVPS/MCU PWB.
Description: PAGE-SYNC is caused before the preparation of video output is completed.
Causes: PageSync becomes active before writing output data until buffer becomes full when printing. Replace the harness to connect ESS and IOT. Replace ESS PWB.
Causes: Compression/decompress is not finished though the specified data is input when compressing or decompressing. Insert and remove RAM on ESS PWB (if it exists) Execute the DC355 DIAG test, and replace HDD if the trouble is not recovered. Replace ESS PWB.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.