Mã lỗi OKI B721
Code:
Tất cả lỗi (64)
042, 043, 045
049
051
052
067
069
070
072
073
075
077
081
104
106
112
113
114
121
122
123
124
126
127
128
134
155
163
166
167
168
169
170, 171
172, 173
182, 184
190
200, 202
203, 204
207, 208
209
213, 214
231
250
251
254
257
901, 902
903, 904
911, 912
918
923
928
933
934
935
941
942
943
944
945
947
948
982
984
999
Description: Flash File System Error Failed access to Flash set directly on PU/CU board.
Remedy: Run forced initialization of Flash.(Note that NIC- F/W and Mac address is deleted.After the initialization,it is need to download NIC-F/W and / or Mac address by Maintenance utility.)Press"+”,"- ”,"CAN-CEL”to turn power ON . Replace the PU/CU board if symptom does not change.
Description: LED head type (resolution) error LED Head type was mismatched with CU and Engine.
Remedy: 1) Replace the PU/ CU board with the one for the proper head. 2) Replace with a head of proper resolution.
Description: CU Fan Error Abnormal CPU cooling fan on PU/ CU board.
Remedy: Connect Properly. Replace fan. Replace the PU/ CU board.
Description: DMA Abort Error detected in Image processor.
Remedy: Power Off/On. Replace the PU/ CU board.
Description: SleepMode Interface Monitor I/F error with CU F/W.
Remedy: Power Off/On. Replace the PU/ CU board.
Description: The NIC device had not worked correctly.
Remedy: Power Off/On Replace the PU/ CU board.
Description: PSE firmware fault was detected.
Remedy: Power Off/On. Replace the PU/ CU board.
Description: Engine I/F error between PU-CU.
Remedy: Power Off/On. Replace the PU/ CU board.