Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI B8300 — Trang 5/9

Code: F1 38

Description: Console finisher (AR-FN7) punch (AR-PN1) backup RAM trouble. Punch unit backup RAM contents are disturbed.
Causes: Punch control PWB trouble Malfunction by noise
Remedy: Replace the punch control PWB.

Code: F1 80

Description: Finisher (AR-FN6) power abnormality. The 24V power is not supplied to the finisher PWB.
Causes: Improper connection or disconnection of connector and harness Finisher control PWB trouble Power unit trouble
Remedy: Use DIAG (SIM3-2) to check the sensor.

Code: F1 80

Description: Mail-bin stacker (AR-MS1) power abnormality. The 24V power is not supplied to the Mail-bin stacker PWB.
Causes: Improper connection or disconnection of connector and harness Mail-bin stacker control PWB trouble Power unit (AR-DC1) trouble
Remedy: Use DIAG (SIM3-20) to check the sensor operation.

Code: F1 81

Description: Console finisher transport motor abnormality. Transport motor trouble
Causes: Motor lock Motor rpm abnormality Overcurrent to the motor Console finisher control PWB trouble
Remedy: Use DIAG (SIM3-3) to check the motor operation.

Code: F1 87

Description: Finisher (AR-FN6) staple rotation motor trouble. Front staple rotation motor trouble
Causes: Motor lock Motor rpm abnormality Overcurrent to the motor Finisher control PWB trouble
Remedy: Use DIAG (SIM3-3) to check the motor operation.

Code: F2 00

Description: Toner control sensor output open
Causes: Connector harness trouble Connector disconnection
Remedy: Check connection of the toner control sensor. Check connection of connector and harness to the main PWB. Check for disconnection of harness.

Code: F2 02

Description: Toner supply abnormality. Toner control sensor output value becomes under-toner too earlier.
Causes: Connector harness trouble Toner control sensor trouble The toner cartridge seal is not removed
Remedy: Check connection of the connector in the toner motor section. Check connection of connector and harness to the main PWB. Check for disconnection of harness. Toner control sensor output check DIAG (SIM25-1) Remove the toner cartridge seal.

Code: F2 04

Description: Improper cartridge (life cycle error, etc.). An improper process cartridge is inserted.
Causes: IC chip trouble Improper cartridge
Remedy: Insert a proper cartridge.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie