Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI C3100 — Trang 3/8

Code: 031

Display: Service call 031:Error
Description: CU Optional RAM Check Error
Remedy: Is RAM DIMM set properly? Is error recovered by replacing RAM DIMM?
Reset RAM DIMM. Replace RAM DIMM. Replace ARC/SPA board.

Code: 035

Display: Service call 035:Error(C5400 only)
Description: CU Optional RAM Spec Error CU RAM DIMM is not adjust to the specification.
Remedy: Is RAM DIMM genuin? Is RAM DIMM set properly? Is error recovered by replacing RAM DIMM?
Use genuine RAM DIMM. Reset RAM DIMM. Replace RAM DIMM. Replace SPA board.

Code: 040

Display: Service call 040:Error
Description: CU EEPROM Error
Remedy: Does error display reappear? Power OFF/ON Replace ARC/SPA board.

Code: 041

Display: Service call 041:Error
Description: CU Flash Error Flash ROM Error on the CU board.
Remedy: Does error display reappear? Power OFF/ON Replace ARC/SPA board

Code: 042 ... 044

Display: Service call 042:Error ~ 044:Error
Description: Flash File System Error
Failed access to Flash set directly on CU board.
Remedy: Failed access to Flash set directly on CU board. Run forced initialization of Flash.(Note that NICF/ W and Mac address is deleted. After the initialization, it is need to download NIC-F/W and/or Mac address by Maintenance utility.) In the case of before CU-F/W G1.26/X1.26, Press “+”, “-”, “CANCEL” to turn power ON. And after CU-F/W G1.27/X1.27, execute FLASH FORMAT of MAINTENANCE MENU of SYSTEM MAINTENANCE MENU. Release buttons when [FLASH FORMAT] appears, wait until [ONLINE] (2min) and Replace ARC/SPA board if symptom does not change.

Code: 051

Display: Service call 051:Error(C5400 only)
Description: CU Fan Error Abnormal CPU cooling fan on CU board.
Remedy: Is CU Fan connector set properly? Is error recovered by replacing fan?
Connect properly. Replace fan. Replace SPA board.

Code: 051

Display: Service call 051:Error(C5400 only)
Description: DMA Abort Error detected in Image processor.
Remedy: Does error reoccur? Power OFF/ON. Replace SPA board.

Code: 070

Display: Power off/on 070:Error(C5400 only)
Description: PSE firmware fault detected.
Remedy: Does error reoccur? Power OFF/ON. Replace SPA board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie