Description: LED head detection abnormality (131=Y, 132=M, 133=C, 134=K)
Remedy: Is the LED head installed correctly? Does LED HEAD FUSE cut? Does the error recur? Install the LED head correctly Check LED HEAD FUSE. Replace FUSE Turn on the power supply again Replace the LED head unit Please refer to chapter 7.5 for replace method of FUSE. Replace TB3 board
Remedy: Does it has anything trouble with the detaching/attaching of ID unit? Does the error recur? Reinstall the ID unit. Turn on the power supply again Replace the high voltage power supply.
Description: Defective fuse cutting of ID unit Is the ID unit installed correctly? Does the error reoacur? Does it restore by exchanging PRE board
Remedy: Is the ID unit installed correctly? Does the error reoacur? Does it restore by exchanging PRE board Install the ID unit again Turn on the power supply again Replace PRE board after check the cable connection of PRE board - TB3 board Replace TB3 board
Remedy: Is the belt unit installed correctly? Does the error recur? Reinstall the belt unit. Turn on the power supply again Replace TB3 board after check cable connection.
Remedy: Is the fuser installed correctly? Does the error recur? Reinstall the fuser after its connection connector is cleaned Turn on the power supply again Replace TB3 board after check the cable connection.
Description: Defective toner sensor detection It does not occur during shipping setting
Remedy: Is the toner cartridge installed? Is the lock level of toner set? Does the error recur? Does the error recur? Does the error recur? Install a toner cartridge. Turn the lock lever of toner cartridge to the fixed position. Remove the right side cover, take measures to prevent the right side of the device from being exposed to ambient light, and confirm that the toner sensor is lighted during initialization of the device. Reconfirm it after replacing the toner sensor Assy. Replace the TB3 board.
Remedy: Is the error message displayed? Does the error recur? Turn on the power supply again Turn on the power supply again after storage for 30 minutes.
Remedy: Is the error message displayed? Does the error recur? Turn on the power supply again Turn on the power supply again after storage for 30 minutes.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.