Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI C511 — Trang 3/8

Code: 074, 075

Display: POWER OFF/ON 074:ERROR xxxx 075:ERROR xxxx
Description: Video error. An error was detected in expanding image data.
Remedy: Is the CU/PU installed properly?
Reinstall it properly. Replace it.

Code: 081

Display: SERVICE CALL 081:ERROR
Description: Parameter matching check error
Reading from or writing into EEPROM or flash memory cannot be made properly.
Remedy: Reading from or writing into EEPROM or flash memory cannot be made properly. Turn off and on the printer. Replace the CU/ PU board when the symptom persists.

Code: 104

Display: SERVICE CALL 104:ERROR
Description: An engine EEPROM read/write error was detected.
Remedy: Does the error occur again? Yes Turn off and on the printer Replace the CU/ PU board.

Code: 106

Display: SERVICE CALL 106:ERROR
Description: Engine control logic error
Remedy: Does the error occur again? Yes Turn off and on the printer Replace the CU/ PU board.

Code: 112

Display: SERVICE CALL 112:ERROR
Description: The 2nd tray for a model different from the printer was detected.
Remedy: Is the 2nd tray for the printer installed? No Install proper 2nd tray.

Code: 121

Display: SERVICE CALL 121:ERROR
Description: High-voltage power supply interface error
Remedy: Is the cable between the CU/ PU board and the high-voltage power unit connected properly? Is a contact faulty?
Reconnect it properly. Check the highvoltage line for no poor connection. Replace the highvoltage power supply.

Code: 122

Display: SERVICE CALL 122:ERROR
Description: Rear-fan error
Remedy: Does the fan at the rear of the printer operate? Is the connector of the fan connected properly?
Be sure of the connection of the fan. Replace the CU/ PU board. Connect the fan properly. Replace the CU/ PU board.

Code: 123

Display: SERVICE CALL 123:ERROR
Description: Ambient humidity error or non connection of humidity sensor
Remedy: Is the cable from the CU/PU board to the toner sensor board connected properly?
Re-connect it properly. Replace the toner sensor board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie