Các lỗi thường gặp

Code :
  • Code: 073
  • Display: Power off/on 073:Error xxxxxxxx
  • Description: Video Error Fault detected when image data is extended.
  • Causes: [C5200/C5150/C3100] Is CU assembly set properly? Fault again? [C5400] Is CU assembly set properly?
  • Code: 074, 075
  • Display: Power off/on 074:Error xxxxxxxx 075:Error xxxxxxxx
  • Description: Video Error Fault detected when image data is extended.
  • Causes: Is CU assembly set properly?
  • Code: 104
  • Display: Service call 104:Error
  • Description: Engine EEPROM setting check is OK when power ON. Then detect read/ write error.
  • Causes: Does error reoccur?
  • Code: 105
  • Display: Service call 105:Error
  • Description: An error detected by checking, at printer's powerom, EEPROM installation.
  • Causes: Does error reoccur?
  • Code: 106
  • Display: Service call 106:Error
  • Description: Abnormal engine control logic.
  • Causes: Does error reoccur?
  • Code: 111
  • Display: Service call 111:Error
  • Description: Detected illegal Duplex Unit.
  • Causes: Is Duplex Unit of C5300/C5100 installed?
  • Code: 112
  • Display: Service call 112:Error
  • Description: Detected illegal 2nd Tray.
  • Causes: Is 2nd Tray of C5300/C5100 installed?
  • Code: 121
  • Display: Service call 121:Error
  • Description: High-voltage power supply I/F error.
  • Causes: Is cable between PU board and high-voltage power unit connected properly? Is there no improperly connections?
 < 1 2 3 4 5 6 7 >  Last ›
popup

Số lượng:

Tổng tiền:

Danh mục