Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI C5300 — Trang 2/8

Code: -

Display: WDT ERROR
Description: PU firmware went haywire.
Remedy: Does error reoccur? Turn on the printer again. Replace the PU board (PRN).

Code: -

Display: COMMUNICATION ERROR
Description: An error in a PUCU interface.
Remedy: Is the CU assy installed properly? Does the printer recover from the error by replacing the ARC/ SPA board.
Reinstall the assy properly. Replace the ARC/SPA board. Replace the PU board (PRN).

Code: 001

Display: Service call 001:Error(C5400 only)
Description: Machine Check Exception Hardware fault detected. (Board defectiveness or Shortage of power supply volume)
Remedy: Replace SPA board

Code: 002, 006, 007

Display: Power off/on 002:Error ~ 006:Error 007:Error(C5400 only)
Description: CPU Exception
Remedy: Does error display reappear? Power OFF/ON Replace ARC/SPA board.

Code: 020

Display: service 020:Error
Description: CU ROM Hash Check Error
Remedy: Does error display reappear? (the case of a device which program ROM is attached to board directly.) Power OFF/ON Replace ARC/SPA board.

Code: 020

Display: Service call 020:Error(C5400 only)
Description: CU Program ROM Hash Check Error
Remedy: Is program ROM DIMM set properly? Is error recovered by replacing program ROM DIMM? (the case of a device which program ROM is set to DIMM Slot.)
Reset ROM DIMM Replace program ROM DIMM. Replace SPA board.

Code: 023

Display: Service call 023:Error(C5400 only)
Description: CU Font ROM Hash Check Error
Remedy: Does error display reappear? Power OFF/ON Replace SPA board.

Code: 030

Display: Service call 030:Error
Description: CU RAM Check Error
Remedy: Does error display reappear? Power OFF/ON Replace ARC/SPA board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie