Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI C711WT — Trang 2/7

Code: 041

Display: Service call 041: Error
Description: CU Flash Error. Flash ROM Error on the CU/PU board
Remedy: Does the error display recur? Yes Turn off the power of the printer and back on. Replace the CU/PU board.

Code: 042 ... 045

Display: Service call 042: Error~ 043: Error 045: Error
Description: Flash File System Error
Remedy: Failed to access to the Flash ROM that is directly soldered to the CU/PU board. Turn off the power of the printer and back on. Replace the CU/PU board.

Code: 072

Display: Restart the printer. 072: Error. Xx
Description: Engine I/F Error. I/F error between PU and CU
Remedy: Is the CU/PU assembly installed normally? Does the printer recover from the error when the CU/PU board is replaced?
Re-install the CU/PU assembly normally. Replace the CU/PU board.

Code: 073

Display: Restart the printer. 073: Error xxxxxxxx
Description: Video Error Error is detected when expanding the video data. (Illegal data is received.)
Remedy: Is the CU/PU assembly installed normally? Does this error recur?
Re-install the CU/PU assembly normally. Change the PC with another PC having high specifications, or alternately reduce resolution power and execute the print again. Replace the CU/ PU board. Replace the interface cable. Re-install the PC printer driver.
Is the CU/PU assembly installed normally? Does this error recur? Does the error depend on print data?
Re-install the CU/PU assembly normally. Execute the print again. Print any other data. Replace the CU/ PU board. Send the data to design division and request analysis of the data.

Code: 074, 075

Display: Restart the printer. 074: Error xxxxxxxx 075: Error xxxxxxxx
Description: Video Error Error is detected when expanding the video data.
Remedy: Is the CU/PU assembly installed normally?
Re-install the CU/PU assembly normally. Replace the CU/ PU board.

Code: 081

Display: Service call 081: Error
Description: Parameter integrity check
Remedy: Either EEPROM or Flash ROM cannot read/write normally. Turn the printer power off and then back on. If the error symptom remains unchanged, replace the CU/PU board.

Code: 104

Display: Service call 104: Error
Description: Read/write error of the engine EEPROM is detected.
Remedy: Does this error recur? Yes Turn off the power of the printer and back on. Replace the CU/ PU board.

Code: 106

Display: Service call 106: Error
Description: Engine control logic has an error.
Remedy: Does this error recur? Yes Turn off the power of the printer and back on. Replace the CU/ PU board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie