Description: Short or open circuit detected at the Fusert hermistor. (H or L temperature error)
Remedy: 1) Is the error message displayed? 2) Does the error repeat? Turn off/on the printer. Replace the Thermistor and turn off the printer. Leave it for 30 min.
Description: High temperature error detected at Thermistor
Remedy: 1) Is the error message displayed? 2) Does the error repeat? Turn off/on the printer. Replace the Thermistor and turn off the printer. Leave it for 30 min.
Description: Low temperature error detected at Thermistor.
Remedy: 1) Is the error message displayed? 2) Does the error repeat? Turn off/on the printer. Replace the Thermistor or heater and turn off the printer.
Description: No Fuser unit detected when turning on the printer or closing the cover
Remedy: 1) Is the error message displayed? 2) Is the Fuser unit mounted properly? 3) Does the error repeat? Confirm the existence of the unit. Re-install the Fuser unit and turn off/on the printer. Replace the Fuser unit Assy.
Description: No Belt unit detected when turning on the printer or closing the cover.
Remedy: 1) Is the error message displayed? 2) Is the Belt unit mounted properly? 3) Does the error repeat? Confirm the existence of the unit. Re-install the Belt unit and turn off/on the printer. Replace the Belt unit Assy.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.