Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI C831n — Trang 2/11

Code: 031

Display: Service call 031: Error
Description: CU Optional RAM Check Error
Remedy: Is implementation of the RAM DIMM normal? Does replacement of the program RAM DIMM restore the printer?
Re-implement the RAM DIMM. Replace the RAM DIMM. Replace the CU/ PU board.

Code: 036

Display: Service call 036: Error
Description: CU RAM DIMM spec. is not supported.
Remedy: Is the RAM DIMM genuine? Is implementation of the RAM DIMM normal? Does replacement of the program RAM DIMM restore the printer?
Use a genuine RAM DIMM. Re-implement the RAM DIMM. Replace the RAM DIMM. Replace the CU/PU board (EEPROM replacement required).

Code: 040

Display: Service call 040: Error
Description: CU EEPROM Error
Remedy: Does this error message reappear? Yes Cycle the power. Replace the CU/ PU board.

Code: 042, 043, 045

Display: Service call 042: Error~ 043: Error 045: Error
Description: Flash File System Error
Failed to access to the Flash ROM that is directly mounted on the CU board.
Remedy: Failed to access to the Flash ROM that is directly mounted on the CU board. Format the Flash forcibly. (This requires caution as it erases NIC-F/W. The NIC-F/W must be written with the maintenance utility after formatting.) Execute system maintenance menu > MAINTENANCE MENU > FLASH FORMAT. After FLASH FORMAT is displayed, release the button and wait until the ON LINE is displayed (about 2 minutes). If the error remains, replace the CU/PU board.

Code: 049

Display: Service call 049: Error
Description: Incompatibility between the CU and the engine head type (resolution)
Remedy: 1) Replace the CU/ PU board with the one for the proper head. 2) Replace with a head of proper resolution.

Code: 052

Display: Power off/on 052: Error
Description: A DMA Abort error was detected with the Image Processor.
Remedy: Does this error message reappear? Yes Cycle the power. Replace the CU/ PU board.

Code: 067

Display: Service call 067: Error
Description: A communication error was detected during communication with the Sleep Mode interface supervisor program.
Remedy: Does this error recur? Yes Cycle the power. Replace the CU/ PU board.

Code: 068

Display: Service call 068: Error
Description: The Sleep Mode interface supervisor program was not found.
Remedy: Does this error recur after power restoration? Yes Program writing by service personnel.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie