• Code: 382
• Display: Open Stacker Cover 382: Paper Jam
• Description: Paper jam detected in the Fuser unit or btwn the Fuser and paper ejection.
• Remedy: 1) Is a paper jammed in the Fuser unit or between the Y ID and Fuser unit? 2) Is the Paper eject switch work normally? Remove the jammed paper. Replace the Fuser unit.

• Code: 383
• Display: Open Stacker Cover 383: Paper Jam
• Description: Paper jam detected on paper entering the Duplex unit.
• Remedy: 1) Is a paper jammed at the entrance of the Duplex unit or in the unit? Remove the jammed paper and close. Check the Duplex unit, or replace it.

• Code: 390
• Display: Check MP Tray 390: Paper Jam
• Description: Paper jam during paper feed from the MP Tray.
• Remedy: 1) Does misfeed occur around the MP Tray? Remove the misfed paper and close the cover. Check the MP Tray, or replace it.

• Code: 391 ... 395
• Display: Check Tray 391~395: Paper Jam
• Description: Paper jam detected btwn a cassette and the B ID.
• Remedy: 1) Is a paper jammed around the cassette or between the B ID and cassette. 2) Does the Paper entry switch operate normal? Remove the jammed paper. Replace the Paper entry switch.

• Code: 400
• Display: Open Stacker Cover 400: Paper Size Error
• Description: Paper in a size different (45 mm or more) from the specification detected at the Printer engine.
• Remedy: 1) Is the paper in a custom size? 2) Is the paper in the standard size? No action required. Adjust the Paper size guide of the cassette. Replace the Paper size board (PXC PWB).

• Code: 410 ... 413
• Display: Toner Low 410: Yellow 411: Magenta 412: Cyan 413: Black
• Description: Toner in one of the four colors is running short.
• Remedy: 1) Is the specified toner cartridge almost empty? 2) Does the Toner sensor of the specified cartridge operate normally? Replace it with a new toner kit. Replace the Toner sensor for the specified color.

• Code: 480
• Display: Remove Printed Papers 480: Stacker Full
• Description: The stacker for ejected papers is full.
• Remedy: 1) Is the stacker full? 2) Does the Stacker full sensor operate normally?
  Remove papers from the stacker. Replace the Stacker full sensor.

• Code: 490
• Display: Load * Papers 490: No paper in the MP Tray ( *= A4, B5 etc.)
• Description: The specified cassette has no paper or is removed. Or, the cassette be ingused for printing has no more paper.
• Remedy: 1) No paper in MT? 2) Does the Paper out sensor operate normally?
  Load papers in MT. Replace the Paper out sensor.