Các lỗi thường gặp

Code :
  • Code: 001
  • Display: Service Call 001:Error
  • Description: Machine Check Exception hardware problem was detected (PCB failure or insufficient power capacity). (PDL only) When CE1 was not detected, SC001 occurs.
  • Remedy: Replace the printer control PCB.
  • Code: 002, 003, 005
  • Display: Power Off/On 002:Error 003:Error 005:Error
  • Description: CPU unexpected exception
  • Remedy: Does this error message reappear? Yes Power OFF/ON. Replace the printer control PCB.
  • Code: 012
  • Display: Power Off/On 012:Error
  • Description: A watchdog timeout occurred due to no system timer interrupt for unknown reasons.
  • Remedy: Does this error message reappear? Yes Power OFF/ON. Replace the printer control PCB.
  • Code: 020
  • Display: Service Call 020:Error
  • Description: The CU FW in Nand FLASH has not been detected, or a check SUM error has occurred.
  • Remedy: Does this error message reappear? Yes Power OFF/ON. Replace the printer control PCB.
  • Code: 024
  • Display: Service Call 024:Error
  • Description: CU Font ROM Hash Error
  • Remedy: Does this error message reappear? Yes Power OFF/ON. Replace the printer control PCB.
  • Code: 030
  • Display: Service Call 030:Error
  • Description: CU RAM Check Error
  • Remedy: Does this error message reappear? Yes Power OFF/ON. Replace the printer control PCB.
  • Code: 040
  • Display: Service Call 040:Error
  • Description: CU EEPROM Error
  • Remedy: Does this error message reappear? Yes Power OFF/ON. Replace the printer control PCB.
  • Code: 042, 043, 045
  • Display: Service Call 042:Error 043:Error 045:Error
  • Description: Flash File System Error
  • Remedy: Failed to access to the Flash ROM that is mounted directly on the CU PCB. Format the Flash forcibly. (This requires caution as it erases NIC-F/W. The NIC-F/W must be written with the maintenance utility after formatting.) If the error remains, replace the printer control PCB.
 1 2 3 4 >  Last ›
popup

Số lượng:

Tổng tiền:

Danh mục