Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI C941e — Trang 6/8

Code: 169

Display: Service Call 169:Error
Description: 01: thermistor is detected as shorted 02: thermistor is detected as open 03: thermistor indicates high temperature error 04: thermistor indicates low temperature error
Remedy: Is the error message displayed? Yes Restore the power. Does this error recur? Yes After leaving the printer for 30 minutes, turn on the power again

Code: 170, 171

Display: Service Call 170:Error 171:Error
Description: Short circuit (170) or open circuit (171) of the fuser thermistor was detected.
Remedy: Does this error recur? Yes Restore the power. Replace the fuser unit.

Code: 172, 173

Display: Service Call 172:Error 173:Error
Description: An abnormal (172: high or 173: low) temperature of the fuser thermistor was detected.
Remedy: Does this error recur? Yes Restore the power. Replace the fuser unit. When the power is restored, the display may change to Service Call 994: Error in some cases.

Code: 181 ... 185

Display: Service Call 181:Error 182:Error 183:Error 184:Error 185:Error
Description: Option unit I/F error (181 = Duplex Unit, 182, 183, 184, 185 = Optional Tray)
Remedy: Does this error recur? Yes Restore the power. Check to make sure the contact points of the connector and replace the optional unit.

Code: 188

Display: Service Call 188:Error
Description: 01: Error in communication with Port CPU.
02: Error in communication with Driver CPU
Remedy: 01: Error in communication with Port CPU Power OFF/ON. Does this error recur? Yes Replace the printer control PCB.
02: Error in communication with Driver CPU Does this error recur? Yes Replace the Driver PCB.

Code: 190

Display: Power Off/On 190:Error
Description: System memory overflow
Remedy: Power OFF/ON. Does this error recur? Yes Replace the printer control PCB.

Code: 203, 204

Display: Power Off/On 203:Error 204:Error
Description: CU program error (not occur in normal operation)
Remedy: Power OFF/ON. Does this error recur? Yes Replace the printer control PCB.

Code: 207, 208

Display: Power Off/On 207:Error 208:Error
Description: CU program error (not occur in normal operation)
Remedy: Power OFF/ON. Does this error recur? Yes Replace the printer control PCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie