Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI C9800 — Trang 15/15

Code: 932

Display: Service Call 932
Description: Inverter CPU Clock Frequency Error
Remedy: The inverter CPU clock frequency is not correct. Does the error still occur?
Check the connection of the V72-3 board. Replace the V72-3 board.

Code: 933

Display: Service Call 933
Description: Trya2 CPU Clock Frequency Error
Remedy: The tray-2 CPU clock frequency is not correct. Does the error still occur?
Check the connection of the V72-1 board of tray 2. Replace the V72-1 board.

Code: 934

Display: Service Call 934
Description: Trya3 CPU Clock Frequency Error
Remedy: The tray-3 CPU clock frequency is not correct. Does the error still occur?
Check the connection of the V72-1 board of tray 3. Replace the V72-1 board.

Code: 935

Display: Service Call 935
Description: Trya4 CPU Clock Frequency Error
Remedy: The tray-4 CPU clock frequency is not correct. Does the error still occur?
Check the connection of the V72-1 board of tray 4. Replace the V72-1 board.

Code: 936

Display: Service Call 936
Description: Trya5 CPU Clock Frequency Error
Remedy: The tray-5 CPU clock frequency is not correct. Does the error still occur?
Check the connection of the V72-1 board of tray 5. Replace the V72-1 board.

Code: 940

Display: Service Call 940
Description: Waste Toner Transfer Error
Remedy: The transfer mechanism of the toner duct for ID is not operating properly. Does the error still occur?
Check to confirm that the basket assembly is in position (if it is engaged with the gear of the printer). Check to confirm that the holder magnet D contains a magnet, and check the magnetic polarity. Replace the HAL IC circuit board. Replace the duct assembly toner.

Code: F0C, F0D, FFE, FFF

Display: Service Call 203: Error to 208: Error
210: Error to 214: Error 0xFOC: Error 0xFOD: Error 0xFFE: Error 0xFFF: Error
Description: CU Program Dysfunction
Detected illegal process with CU program.
Remedy: Detected illegal process with CU program. Write down the 24 digit number displayed on the LCD panel and report it. Turn OFF the power. Then check the insertion of the CU board. Now turn ON the power again.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie