Các lỗi thường gặp

Code :
  • Code: 181, 182
  • Display: Service call 181:Error 182:Error
  • Description: Option unit I/F error. 181 = Duplex Unit 182 = Option Tray)
  • Remedy: Does error reoccur? Yes Turn power ON again. After checking connection parts of connector, replace option unit.
  • Code: 190
  • Display: Power off/on 190:Error
  • Description: System Memory Overflow.
  • Remedy: Does error reoccur? Yes Turn power ON again. Add option RAM DIMM.
  • Code: 200 ... 202
  • Display: Service call 200 ~ 202 Error
  • Description: PU Firmware download Error.
    Error occurred while writing over the PU firmware.
  • Remedy: Error occurered while writing over the PU firmware. Turn the printer OFF/ON, and retry to download the PU firmware again. (Usually, the procedure (PU firmware download) which isn’t done, so this is not occur.)
  • Code: 203 ... 214
  • Display: Power off/on Error codes 203,204, 207, 208, 214, FOC, FFF F0D: Error(C5900) FFE: Error(C5900)
  • Description: An error was detected of the CU program.
  • Remedy: Reinstall the CU board. Is the error message displayed again? After turn power OFF, check connections between CU board and PU board. Then turn power ON again.
  • Code: 209
  • Display: Power off/on 209:Download Error
  • Description: Media Table download Error.
    Downloading Media Table to PU has failure.(Related to Custom Media Type)
  • Remedy: Downloading Media Table to PU has failure.(Related to Custom Media Type) Turn the printer OFF/ON, and retry to download the PU firmware, again. (Usually, the procedure isn’t done, so this is not occur.)
  • Code: 220
  • Display: Service call 220:Error
  • Description: False setting of a record medium detected by a print statistics.
  • Remedy: Take off the HDD or replaced? Yes Reset original HDD.
  • Code: 230
  • Display: Service call 230:Error
  • Description: RFID Reader not Installed
  • Remedy: RFID read device error Is the error issued again?
    Check the connection of the RFID R/W board. Replace the RFID R/W board. Replace the S2V PCB.
  • Code: 231
  • Display: Service call 231:Error
  • Description: RFID Reader I/F Error
    An interface error was detected with the RFID reader device. 01: communication error between the RFID reader and the engine PCB. 02: the transceiver circuit error of the RFID reader. 03: communication error between the RFID reader and the toner cartridge. 04: the toner cartridge detection error (more than 4).
  • Remedy: 01: Same as Error 230 02: Replace RFID R/W board. 03: Check the antenna cable connection. 04: Check to see if the quantity of toner cartridge is correct.
‹ First  < 4 5 6 7 8 9 > 
popup

Số lượng:

Tổng tiền:

Danh mục