Mã lỗi OKI CX2731 — Trang 8/8
Code:
Tất cả lỗi (62)
001
002, 006, 009, 011
020
024, 025
030
031, 036
040
041
042, 043, 045
052
064
067, 068
069
070
072
073
074, 075
081
104
106
112
121
122
123
124
128.05
128.08
131 ... 134
142
153
154
155
160 ... 163
167
168
170, 171
172, 173
174
175
176, 177
182
190
200, 201, 202
203 ... 214
209
231
250
251
252 ... 255
256, 257
802, 803, 805, 807, 808
811, 812, 813
890
901 ... 904
923
928
933
941, 942, 943, 944
980
983
990
F0C, FFE, FFF
Display: Power OFF/ON 933 : Error
Description: Tray-2 CPU clock frequency error
Remedy:
Display: Power OFF/ON 941 : Error 942 : Error 943 : Error 944 : Error
Description: PU Error A PU error was detected. 941 : Watch Doc Timer Error 942 : Detection of Unassigned Interruption 943 : CPU Error Detection 944 : Dcon Access Error
Remedy: Turn off and on the MFP. When this error occurs again, replace the CU/ PU board.
Display: Inspection is required. 980 : Error
Description: Duplicate toner cartridge detection error Multiple toner cartridges for the same color ware detected.
Remedy: Turn off the MFP. Replace the fuser.
Display: Inspection is required. 983 : Error
Description: Duplicate toner cartridge detection error Multiple toner cartridges for the same color ware detected.
Remedy: Install toner cartridges for specified colors at the proper positions.
Display: Inspection is required. 990 : Error
Description: Waste toner sensor detection error
Remedy: Is the K toner cartridge installed? Does the error occur again? Install the K toner cartridge. Be sure of cable connection, and then perform board replacement.
Display: Power OFF/ON 203 : Error 204 : Error 207 : Error 208 : Error 213 : Error 214 : Error F0C : Error FFE : Error FFF : Error
Description: CU program error (203 to 214 do not occur in general use of the MFP)
Remedy: Invalid processing was performed with a CU program. Replace the CU/PU board.