Code :

Code: 042, 043, 045
Display: Inspection is required. 042 : Error 043 : Error. 045 : Error
Description: Flash memory file system error
Accessing the flash ROM directly mounted on the CU/ PU board failed.
Remedy: Accessing the flash ROM directly mounted on the CU/ PU board failed. Turn off and on the MFP. Replace the CU/ PU board.

Code: 052
Display: Power OFF/ON 052 : Error
Description: Image processor driver error
Remedy: Is the error display provided again? Yes Turn off and on the MFP. Replace the CU/ PU board.

Code: 070
Display: Power OFF/ON 070 : Error
Description: PostScript error
Error is deteced inside the postscript core
Remedy: Error is deteced inside the postscript core Take note of the address that is displayed on LCD. Turn off and on the MFP.

Code: 072
Display: Power OFF/ON 072 : Error
Description: Engine interface error or PU-CU interface error
Remedy: Is the CU/PU board installed properly?
Reinstall the CU/ PU board properly. Replace the CU/ PU board.

Code: 073
Display: Power OFF/ON 073 : Error
Description: Video error. An error was detected in expanding image data (an invalid data was received)
Remedy: Is the CU/PU board installed properly? Does the error occur again?
Reinstall it properly. Change the PC to a high-specification one or decrease the resolution, and perform printing again. Replace the CU/ PU board. Replace the interface cable. Reinstall the PC printer driver.
Is the CU/PU board installed properly? Does the error occur again? Does the error depend on print data?
Reinstall it properly. Perform printing again. Print other data. Replace the CU/PU board. Ask design people to analyze the data.

< 1 2 3 4 5 > Last ›