Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI ES1624nMFP

Code: -01

Display: Loader V. xx.xx PW-LSI ERROR
Description: A high-voltage power unit interface error at initialization.
Causes: Is the cable between the PU board and the high-voltage power unit connected properly? Is there poor contact?

Code: -02

Display: Loader V. xx.xx S-RAM ERROR
Description: A PU board SRAM error.
Causes: Does error reoccur?

Code: -03

Display: XXXXXXXXXXXXXXXX CRC CHECK ERR
Description: A PU download data CRC check error.
Causes: After PU data (PU firmware, custom media data and LED head adjustment data) downloading, a CRC check error was detected.

Code: -04

Display: XXXXXXXXXXXXXXXX PU DOWNLOAD MODE
Description: A PU board flash ROM hash check error.
Causes: Does error reoccur?

Code: -05

Display: XXXXXXXXXXXXXXXX FLASH TOGGLE ERR
Description: A PU board flash ROM writing error.
Causes: A flash ROM writing error was detected during the downloading of PU data. Does error reoccur?

Code: -06

Display: XXXXXXXXXXXXXXXX ERR PU-DCON BUSY
Description: An error in communication with the ASIC on the CU board.
Causes: Is the CU assy installed properly? Does the printer recover from the error by replacing the ARC/ SPY/SPA board.

Code: -07

Display: OPECODE TRAP ERR
Description: PU firmware went haywire.
Causes: Does error reoccur?

Code: -08

Display: BRK INST EXECUTE
Description: PU firmware went haywire.
Causes: Does error reoccur?
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie