Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI ES3451 — Trang 4/8

Code: 124

Display: Inspection is required. 124 : Error
Description: Ambient temperature error
Remedy: Is the cable from the CU/PU board to the toner sensor board connected properly?
Re-connect it properly. Replace the toner sensor board.

Code: 128.05

Display: Inspection is required. 128 : Error 05
Description: Image drum fan error
Remedy: Is the connector of the fan connected properly? Does the error occur again?
Re-connect it properly. Replace the fan motor. Replace the CU/PU board.

Code: 128.08

Display: Inspection is required. 128 : Error 08
Description: Front fan error
Remedy: Is the connector of the fan connected properly? Does the error occur again?
Re-connect it properly. Replace the fan motor. Replace the CU/PU board.

Code: 131 ... 134

Display: Inspection is required. 131 : Error - 134 : Error
Description: LED head detection error (131=Y, 132=M, 133=C, 134=K)
Remedy: Is the LED head installed properly? Is the LED head fuse broken? Does the error occur again?
Install the LED head unit. Check the LED head fuse. Check the fuse. Turn off and on the MFP. Replace the LED head unit.

Code: 142

Display: Inspection is required. 142 : Error
Description: Image drum up-down movement position detection error
Remedy: Is the image drum unit removed and installed smoothly? Is the connector of the image drum up-down clutch is connected properly?
Re-install it. Be sure of the connection of the image drum up-down clutch connector. Replace the toner sensor board. Connect the image drum updown clutch properly.

Code: 153

Display: Inspection is required. 153 : Error
Description: Image drum unit fuse-cut error
Remedy: Is the image drum unit installed properly? Does the error occur again? Is the MFP recovered by replacing the toner sensor board.
Re-install it. Turn off and on the MFP. Be sure of the cable connection from the CU/PU board to the toner sensor board, and then replace the toner sensor board. Replace the CU/PU board.

Code: 154

Display: Inspection is required. 154 : Error
Description: Belt unit fusecut error
Remedy: Is the belt unit installed properly? Does the error occur again?
Re-install it. Turn off and on the MFP. Be sure of cable connection, and then replace the CU/PU board.

Code: 155

Display: Inspection is required. 155 : Error
Description: Fuser unit fuse-cut error
Remedy: Is the fuser unit installed properly? Does the error occur again?
Clean the connection connector of the fuser unit, and then reinstall the fuser unit. Turn off and on the MFP. Be sure of cable connection, and then replace the CU/PU board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie